CONNECTING OTHER EQUIPMENT
a
s f g d
a RS232C |
| g IR RECEIVER IN (SR8002 Only) |
ENGLISH
Connect an external control device or other device for servicing. (Use a straight cable for the connection.)
sDC OUT (DC TRIGGER)
External devices can be controlled from the unit by connecting them to the DC OUT terminal (12 V 44mA max).
This unit can be operated by remote controller without using the internal IR receiver, by connecting an external IR receiver.
GND
+12V
Signal
dEMITTER OUT (SR8002 Only)
Outputs the remote control signal input to the IR RECEIVER IN terminals. External components can be controlled by connecting them to the EMITTER OUT terminal.
fFLASHER IN
This unit can be controlled by connecting a control box or other control device to this unit.
An IR receiver is connected as shown above.
Caution:
•Wrongly connecting an IR receiver or connecting an IR receiver of the wrong voltage can damage the unit, therefore do not do this.
•50 mAof current are supplied to the device connected to the IR RECEIVER IN terminal.
•Connecting a device that requires more than 50 mA of current to this unit will damage this unit. Before using other devices, carefully check the specifications of those devices.
39
