Front KEY Button Lock of the Unit, Hdmi, General

ENGLISH	AUTO MULTI	EXIT	SPEAKERS A/B
	AV SURROUND RECEIVER SR8002

TECHNICAL SPECIFICATIONS

FRONT KEY (BUTTON) LOCK OF THE UNIT

To lock all front panel buttons (except the POWER ON/OFF button) and the INPUT SELECTER and

FM TUNER SECTION

Frequency Range		87.5 – 107.9 MHz
Usable Sensitivity		IHF 1.8 µV/16.4 dBf
Signal to Noise Ratio		Mono/Stereo 75/70 dB
Distortion		Mono/Stereo 0.2/0.3 %
HD Radio (SR8002 only)		0.02 %
Stereo Separation		1 kHz 45 dB
HD Radio (SR8002 only)		1 kHz 85 dB
Alternate Channel Selectivity		.................± 400 kHz 60 dB
Image Rejection		98.1 MHz 70 dB
Tuner Output Level	1 kHz, ± 75 kHz Dev 800 mV

HDMI

Version	.........................................................1.3a [INPUT]
.........................................................	1.3a [OUTPUT]

GENERAL

Power Requirement

AC 120 V 60 Hz

Power Consumption

6.5A (SR7002)

..........................................................

6.7A (SR8002)

Weight

33.1 lbs (15.0 Kg) (SR7002)

.....................................

33.1 lbs (15.0 Kg) (SR8002)

ACCESSORIES
Remote Control Unit RC8001SR	1
Remote Control Unit RC101	1
Microphone	1
AAA-size batteries	5
FM Antenna (SR7002)	1
FM Feeder Antenna (SR8002)	1
FM Antenna Converter (SR8002)	1
AM Loop Antenna	1
Front AUX Jack Cover	1
AC cable	1

VOLUME knobs, hold the AUTO and EXIT buttons on the front panel simultaneously for at least 3 seconds. At this time, “F-KEY LOCK!” is displayed.

To unlock the controls, press the same buttons again simultaneously for at least 3 seconds. At this time, “F-KEY UNLOCK” is displayed, and the buttons are released.

GENERAL MALFUNCTION

If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:

-disconnect the plug from the AC line supply

-after waiting at least three minutes, reconnect the plug to the AC line supply

-re-attempt to operate the equipment

Memory backup

•In case a power outage occurs or the power cord is accidentally unplugged, this unit is equipped with a backup function to prevent memory data such as the preset memory from being erased.

HOW TO RESET THE UNIT

Should the operation or display seem to be abnormal, reset the unit with the following procedure.

This unit is turned on, press and hold the MULTI

+SPEAKERS A/B buttons simultaneously for 3 seconds or more.

Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings.

AM TUNER SECTION

Frequency Range	530 – 1710 kHz
Signal to Noise Ratio	50 dB
Usable Sensitivity	Loop 500µV
Distortion	400Hz, 30 % Mod. 0.5 %
HD Radio (SR8002 only)	1Hz, 0.02 %
Selectivity	± 20 kHz 70 dB

AUDIO SECTION

SR7002

Power Output (20 Hz – 20 kHz/THD=0.08%)

Front L&R	8 ohms 110 W / Ch
Center	8 ohms 110 W / Ch
Surround L&R	8 ohms 110 W / Ch
Surround Back L&R	8 ohms 110 W / Ch
Front L&R	6 ohms 140 W / Ch
Center	6 ohms 140 W / Ch
Surround L&R	6 ohms 140 W / Ch
Surround Back L&R	6 ohms 140 W / Ch

SR8002

Power Output (20 Hz – 20 kHz/THD=0.08%)

Front L&R		8 ohms 125 W / Ch
Center		8 ohms 125 W / Ch
Surround L&R		8 ohms 125 W / Ch
Surround Back L&R		8 ohms 125 W / Ch
Front L&R		6 ohms 160 W / Ch
Center		6 ohms 160 W / Ch
Surround L&R		6 ohms 160 W / Ch
Surround Back L&R		6 ohms 160 W / Ch
Input Sensitivity/Impedance		168 mV/ 47 Kohms
Signal to Noise Ratio(Analog Input / Pure Direct) 105 dB....
Frequency Response
	(Analog Input / Pure Direct)	8 Hz – 100 kHz (± 3 dB)
	...........................................
	(Digital Input / 96 kHz PCM)
	............................................	8 Hz – 45 kHz (± 3 dB)
VIDEO
Television Format		NTSC
Input Level/Impedance		1 Vp-p/75 ohms
Output Level/Impedance		1 Vp-p/75 ohms
Video Frequency Response		5 Hz to 8 MHz (– 1 dB)
Video Frequency (Component) ....		5 Hz to 80 MHz (– 1 dB)
S/N		60 dB

DIMENSIONS

7/8 ins. (22 mm)

13-15/16 ins. (354 mm)

15-5/8 ins. (396 mm)

13/16 ins. (20 mm)

17-5/16 ins.

(440 mm)

6-3/4 ins.	(170 mm)	7-1/4 ins. (184 mm)
9/16 ins.	(14 mm)

Speciﬁcations subject to change without prior notice.

SR7002, SR8002 specifications

The Marantz SR8002 and SR7002 are two of the most acclaimed receivers from Marantz, a widely respected name in the high-fidelity audio and home theater industry. These models embody a blend of advanced technology, exceptional sound quality, and aesthetic design, making them ideal for audiophiles and home theater enthusiasts alike.

The SR8002 stands out with its impressive 7.1 channel configuration and powerful amplification capabilities. It uses a unique current feedback amplifier design, which ensures a wider frequency response and lower distortion, delivering a more dynamic soundstage. The receiver offers 130 watts per channel, guaranteeing ample power for driving even the most demanding speakers. Support for various audio formats such as Dolby TrueHD and DTS-HD Master Audio further enhances the listening experience, providing immersive sound particularly suitable for high-definition movie playback.

In terms of connectivity, the SR8002 is equipped with an extensive array of inputs and outputs, including seven HDMI inputs which support 1080p and 4K resolution pass-through. This makes it compatible with an extensive range of devices, from gaming consoles to Blu-ray players. Users can also enjoy video upscaling through the built-in Faroudja DCDi Cinema technology, which ensures that lower resolution sources are enhanced for a more detailed viewing experience.

On the other hand, the SR7002, while slightly older, is not to be overlooked. It features a 7.1 channel setup as well, but with 125 watts per channel, ensuring it still delivers superb performance. The SR7002 is particularly recognized for its high-quality Dolby Digital EX, DTS-ES, and other multi-channel audio formats, which enhances the listening experience. The sloped front panel design and the high-grade components used contribute significantly to its durable build and sonic performance.

Both models include features like Zone 2 and Zone 3 outputs for multi-room audio setups, allowing users to enjoy different audio sources in different rooms simultaneously. The inclusion of Audyssey MultEQ technology in both receivers automates speaker calibration, optimizing the sound field according to the room's acoustics for a more balanced audio experience.

Aesthetically, both receivers have a classic Marantz look with sleek lines and a distinctive gold and black front panel design, which could seamlessly blend into any home entertainment setup. The combination of their advanced technologies, robust build quality, and user-friendly interface ensure that both the SR8002 and SR7002 maintain their status as favorites among home theater aficionados and those who appreciate high-fidelity audio.

Marantz SR7002 Front KEY Button Lock of the Unit, FM Tuner Section, Hdmi, General, Accessories

Models: SR7002 SR8002

ENGLISH