Marantz SR8002 English, Erasing Programmed Codes, Returning To Initial Settings, Erasing Sources

The USE indicator displays on the LCD, and the newly stored codes can be used.

The input is overwritten, and so the currently displayed text is erased.

Up to six characters can be entered for the direct button indicator.

Press the M button .

When finished entering the text, press the OK cursor button .

Follow the same procedure to enter U, N, and D.

Press the 5 numeric button to select 0.

9. Press the 2 cursor button to move the flashing section.

10.

11.

12.

13.

6. Press the 1 or 2 cursor button . The letter is changed to “A”.

• The 3 and 4 cursor buttons can be used to move the blinking indicator of the section to be rewritten.

7. Press the 3 or 4 cursor buttons to select AUDIO on the direct button indicator. The A fl ashes to indicate that the name can be changed.

8. Press the 7 numeric button to select S.

Each time the button is pressed, the button cycles through S → T → U → 7 → S.

3. Press the DVD source button .

The NAME indicator blinks.

The “ ” blinks to indicate that the letter can be changed.

4. Press the 2 cursor button twice.

The D in DVD blinks to indicate that the letter can be changed.

5. Press the 1 numeric button to select A.

Each time the numeric buttons are pressed, the button cycles through the alphanumeric characters shown below.

1:A → B → C → 1 → A

2:D → E → F → 2 → D

3:G → H → I → 3 → G

4:J → K → L → 4 → J

5:M → N → O → 5 → M

6:P → Q → R → 6 → P

7:S → T → U → 7 → S

8:V → W → X → 8 → V

9:Y → Z → / → 9 → Y

0:SPACE ( ) → + → — → , → ’ → < → > → ? → 0

→SPACE ( )

ERASING PROGRAMMED CODES

(RETURNING TO INITIAL SETTINGS)

Codes can be erased in five ways: by buttons, direct buttons, direct button pages, sources, and by all memory contents.

Erasing Buttons and Erasing Direct Buttons

This example shows how to erase the code learned from the PLAY button of the DVD player and the AUTO code of the AMP direct button.

Erasing buttons

1		3			4
LEARN			LEARN			LEARN
NAME			NAME			NAME
MACRO			MACRO			MACRO
USE	PAGE 1 2 3 4		USE	PAGE 1 2 3 4		USE	PAGE	1 2 3	4

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

6. Press the AMP source button .

7. Press the > button to display the first page for AMP.

8. Press the D1 (AUTO) direct button to be erased while holding down the CLEAR button .

9. Press the D4 (YES) direct button to erase.

The code programmed to the AUTO button is erased.

When the code is cleared, the code for this button resets to the factory default code or becomes blank. The rewritten name returns to the original name.

•To cancel the erasing operation, press the D5 (NO) button to return to the previous screen.

10. When the erasing operation is finished, press the M button .

The USE indicator displays to indicate that the remote controller can now be operated.

Erasing Direct Button Pages

This example shows how to erase the entire direct button second page learned from the DVD player.

1 3 4

6.	original name.	ENGLISH
	Press the D4 (YES) direct button to erase.

All codes and names programmed to page 2 are erased. When the codes are cleared, the codes for this button reset to the factory default code or become blank. Any rewritten names return to the

•To cancel the erasing operation, press the D5 (NO) button to return to the previous screen.

7.When the erasing operation is finished, press the M button .

The USE indicator lights up to indicate that the remote controller can now be operated.

Erasing Sources

This procedure clears all codes and names programmed to the DVD, TV, or other sources. All codes and names in the four direct button pages are also erased.

This example shows how to erase the names and codes learned from the DVD player.

1	3	4
LEARN	LEARN	LEARN
NAME	NAME	NAME
MACRO	MACRO	MACRO

4. Press the button 2 (PLAY) that you want to erase while holding down the CLEAR button .

A message is displayed on the LCD.

5. Press the D4 (YES) direct button to erase. The code programmed to the 2 (PLAY) button is

erased.

When the code is cleared, the code for this button resets to the factory default code or becomes blank.

• To cancel the erasing operation, press the

D5 (NO) button to return to the previous

display.

To erase codes programmed for the CLEAR

LEARN

NAME

MACRO

USEPAGE 1 2 3 4

5

LEARN

NAME

MACRO

USEPAGE 1 2 3 4

LEARN

NAME

MACRO

USEPAGE 1 2 3 4

LEARN

NAME

MACRO

USEPAGE 1 2 3 4

USE PAGE 1 2 3 4 USE PAGE 1 2 3 4 USE PAGE 1 2 3 4

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

4. Press the DVD source button while holding down the CLEAR button .

button, simply press the CLEAR button

twice.

To erase codes programmed for the

SOURCE button, simply press the SOURCE

button twice.

Erasing direct buttons

6 8 9

1. Hold down the M button for three seconds or more.

The menu is displayed.

2. Press the D5 (ERASE) direct button .

3. Press the DVD source button .

The USE and LEARN indicators blink.

4. Press the > button to display the second page.

5. Press the > button while holding down the CLEAR button .

5. Press the D4 (YES) direct button to erase.

All codes and names programmed to the DVD source are erased. When the codes are cleared, the codes for this button reset to the factory default code or become blank. Any rewritten names return to the original name.

• To cancel the erasing operation, press the

D5 (NO) button to return to the previous

display.

6. When the erasing operation is finished, press

the M button .

The USE indicator displays to indicate that the

LEARN	LEARN
	LEARN
NAME	NAME
	NAME
MACRO	MACRO
	MACRO

USE PAGE 1 2 3 4 USE PAGE 1 2 3 4 USE PAGE 1 2 3 4

remote controller can now be operated.

19