ENGLISH | This TUNER information can also be displayed on a | |||
1 | 2 | 3 | 2. | |
7.1CH | ATT | |||
4 | 5 | 6 | ||
DISP | OSD | SLEEP | ||
7 | 8 | 9 |
| |
| THX |
|
| |
CLEAR | 0 | MEMO |
| |
|
| |||
| TUNER | CD | MD |
|
SELECTING MULTICAST CHANNELS
FM HD Radio stations can transmit multiple programs on the same frequency by using what are called
MULTICAST CHANNELS.
1.
SOURCE
Example:
When two multicast channels are broadcast by an HD Radio station at 100.10 MHz
1. Unit receives 99.90 MHz.
↓ (Press [SCAN +].) |
2. Unit receives the main channel of the HD Radio |
PTY AUTO SEARCH
You can use the Program Type information search function for some HD Radio stations. See PTY AUTO SEARCH on p.73.
TAPE | AUX1 LIGHT AUX2 | AMP | 1. |
1 |
| 2 |
|
RC8001SR
Learning Remote Controller
1. Press the AMP button on the remote controller.
2. Press the OSD button.The following information display will be output.
VIDEO :DVD
AUDIO :FM
SURROUND |
DIGITAL |
AAC |
(Using the SR8002)
USE | PAGE | 2 |
M
D1
D2
D3
D4
D5
2.
2.
1.
| station at 100.10 MHz. |
| ↓ (Press [SCAN +].) |
3. | Unit receives multicast channel 1 at 100.10 |
| MHz. |
| ↓ (Press [SCAN +].) |
4. | Unit receives multicast channel 2 at 100.10 |
| MHz. |
| ↓ (Press [SCAN +].) |
SURR - MODE :AUTO
MULTIROOMA:OFF SPK:OFF MULTIROOMB:OFF SPK:OFF MAIN VOLUME
3. When this display appears, press the OSD button again. TUNER information like the following will appear.
TUNER INFORMATION
FREQ:FM 100 . 10MHz
WXYZ - FM
TXT1:Pink floid
TXT2:Money
PTY :Rock
HD - SIG:MARGINAL
4. Press the OSD button again. The information display will go out.
Note:
•When the entire TXT1 or TXT2 character string cannot be displayed at once, the display changes to scrolling display. If text data cannot be received,
1. Press the 3 or 4 cursor buttons on the front panel to select the desired Multicast Channel.
(Using the remote controller)
1. Press the > button until PAGE 2 is displayed.
2. Press the SCAN+ (D1) or SCAN- (D2) buttonto tune in the deseired Multicast channel.
When the unit receives multicast channels, the multicast program number (HD 2) is displayed to the right of the station name displayed on the FL display.
F M W X Y Z - F M HD 2
•This function is not available for AM HD Radio stations because they cannot broadcast multicast channels.
•If the received HD Radio station have multicast channels, the unit scans for frequencies as shown below.
5. Unit receives 100.30 MHz. |
(The station at 100.10 MHz does not have a |
third multicast channel, so the next frequency |
(100.30 MHz) is received.) |
Notes:
•If digital audio data cannot be received after the station is selected, or if the station signal is weak, the unit may not be able to receive the multicast channels.
•If the station signal is weak, the digital audio of the multicast channel may cut out. In this case, “LOADING” is displayed on the FL display.
•If the digital signal of the multicast channel cannot be received, “OFF AIR” is displayed on the FL display and the main channel is selected.
•Multicast channels cannot be received on AM broadcasts.
72