GE 49-8338 ~ ~SW~ Satiationswhere Applia.e Power, Usage Sitiati.ns where Appliance

❑Usage Sitiati.ns where Appliance

PowerCord~ be DiscomectedMquen*.

Anadapter maybe used only on a 15-arnp circuit. Do not use an adapter on a 20-amp circuit. Where local codes permit, a

~wOwY CONNE~ON may be madeto a properlygroundedtwo-prongwall receptaclebythe use ofa ULlistedadapter, availableat mosthardwarestores.me larger slotin the adaptermustbe alignedwiththe largerslotin the wallreceptacleto provide properpolarityin the connectionofthe powercord.

TEMPORARY METHOD	II2T)
(ADAPTERPLUGSNOT ~~11
PERMllTEDINCANADA)
ALIGNLARGE\ ))~ ~-”	ENSUREPROPER
PRONGS/SLOTS	GROUNDAND
w.,,.	FIRMCONNECTION
	BEFOREUSE

CA~ON: Attachingthe adapterground terminalto the wallr~ceptacle-cov~rscrew doesnotgroundthe applianceunlesstie cover screwis metal,andnotinsulated,andthe wall receptacleis groundedthroughthe house wiring.Thecustomershouldhavethe circuit checkedbya qualifiedelectricianto makesure the receptacleis properlygrounded.

men disconnectingthe powercordfromthe adapter,alwaysholdthe adapterwithone hand. Ethis is notdone,the adaptergroundterminal is very likelyto breakwithrepeateduse. Should this happen,DO NOT USEthe appfiance until a proper ground has again been established.

~~SW~ Satiationswhere Applia.e Power

Cordti be Discomected Frquently.

Do not use an adapter plug in these situations because disconnecting of the power cord places undue stiain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the two-prong wall receptacle replaced with a three-prong (grounding) receptacle by a qualifiedelectrician before using the appfiance.

The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CF~ P~t 3280 (formerly the Federal Standard for Mobile Home Construction and Safety,Title 24, HUD, Part 280) or, when such standard is not applicable,the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups),ANSI A225.1,latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current C~/CSA Z240/MH Mobile Home Installation Code.

Elec?ricOisconttecg

1.Locate disconnect plug on the range back.

2.P~nchsides of connector and pull out of range back.

ModelsEquEppedwith ModelsEquippedwith

DuaiBurnefiSealedBurnew

(continuednextpage)

35