GE 49-8338 Before Lighting a Burner, To Light a Sutiace Burner, After Lighting a Burner

I

Before Lighting a Burner

e If drip pansaresuppliedwith yow range,they shouldbe used at dl times.

*Make sure both grateson one side of the range are in placebeforeusing eitherburner.

To Light a Sutiace Burner

Electric I@tion Mdels:

mh tieControlbob inad

mmit to LITEYouwill. hear a little “clicking” noise—the soundof the electricspark ignitingthe burner.

Mter the burnerignites,turn the knobto adjustthe flame size.

-After Lighting a Burner

~Checkto be sure the burneryou turnedon is the one you want to use.

~Do not operatea burnerfor an extendedperiod of time withoutcookwareon tie grate. The finish on the grate may chip withoutcookwareto absorb the heat.

@Be sure the burners and gratesare cool beforeyou place your hand, a pot holder,cleaningclothsor other materialson them.

(continuednextpage)

StandingPilotMtiel:

Wsh controlknob in and turn it to HI position. The burnershouldlightwithina few seconds.

After the burnerignites,turn the knobto adjustthe flamesize.

Flame will h *ost horizontal and willlift sM@tlyaway from the burner when the burner is first turned on. Ablowing or hissingsound may be heard for 30 to 60 s~conds.~~s normal soundis due to improvedinjectionof gas and air into the burner.Put a pan on the burnerbeforelighting it, or adjustthe flame to matchpan size as soonas

it lights,and the blowingor hissingsoundwill be muchless noticeable.

—