GE 49-8338 installation instructions MLEVELBMGTHEmGE, ~Ing

mLEVELBMGTHEmGE

1.Removethe storage drawer,broilerdraweror kickpanel.

2.Usea 3/l& open-endor socketwrenchto backout bothrearlevelinglegs approximatelytwoturns.

3.Usea 1%”open-endor adjustablewrenchto back outthe frontlevelinglegs twoturns.

4.Installthe ovenshelvesin

the ovenandpositionthe range whereit willbe installed.

5.Checkforlevelnessbyplacinga spiritlevelor a cup,partiallyfilledwithwater,on one ofthe ovenracks.Husinga spiritlevel,taketwo readings-with the levelplaceddiagondlytist in one directionandthen the other.

6.Adjustthe levelinglegsuntilthe rangeis level.

7.Afterthe rangeis level,slidethe range away fromthe wallso that the Anti-Tipdevicecan be installed.

m BHSTALLIHGTHEMTU=TIPDEWHCE

W~ING:

~Rangemustbe securedwithan approved Anti-Tipdevice.

@Unlessproperlyinstiled, the range could be tippedbyyou or a childstanding,sitting or leaningon an opendoor.

@Mer instiling the Anti-Tipdevice,verify that it is in placeby carefullyattemptingto tiltthe rangeforward.

~Thisrange has been designedto meet all recognizedindustrytip standardsfor all normalconditions.

~The use ofthis devicedoes not preclude tippingofthe rangewhennot properly installed.

~Ifthe Anti-Tipdevicesuppfiedwiththe rangedoesnot fitthis application,use the

universalAnti-Tipdevice~02X7909.

,*

1.Markthe wallwherethe MGHTEDGEofthe rangeis to be located.Besureto allowforthe countertopoverhangtiyouintendto installthe rangenextto cabinets.

		Anti-Tip i
		Device		i
Slotted				I
Head			-----i--
Screw		Wallplatf3 I
Approx,~~”’				I
				I
			,/
		II	~’	tvlarkedEdge
9-’	2%		/	of Range
		./

,#~

2.Locatetheoutsideedgeofthe device2Y towardthecenteroftherangefromthemarked edgeoftherange.

3.U@ngthe deviceas a template,markthe positionofthe holeforthe screw.

4.Forwoodconstruction,drilla pilotholeat an angleof20degreesfromthe horizontalAnail. or awlmaybe used ifa drillis notavailable.

Mountthe Anti-Tipdevicewiththe screw provided.

For cementor concreteconstruction,you
willneed a I/&x 1%”lagboltanda 1/2”O.D.	m
sleeveanchor,whichare not provided.Drill
the recommendedsizeholeforthe hardware.
Instil the sleeveanchorintothe drilledhole
and then installthe lagboltthroughtie device.	m
The boltsmustbe properlytightenedas
recommended-forthe hardware.
Backof
Range

e

5.Stidethe rangeagainstthe wall,andcheck forproperinstallationby graspingthe tiont edges ofthe rear surfaceunit openingsand carefullyattemptingto tiltthe rangeforward.

40