Adjust the scanner

Adjust the scanner

The scanner is adjusted at the factory. If, however, you drop your machine while moving it, we recommend you adjust scanner.

1.Press Menu repeatedly until TOOLS appears and press OK.

2. Scroll to Adjust Scanner by pressing

and press OK.

3.Load a plain WHITE sheet of paper (no writing or graphics) into the document feeder and press OK.

The machine starts to scan the document to adjust the scanner.

Printing quality may be unexpectedly worse if you do not use a plain WHITE paper for the adjustment.

LCD error messagesThese are the error message that may display along with solutions for you.

DisplayStatus/Solution

Adjust scanner Adjust the scanner to fix this problem as described in Adjust first in TOOLS menu the scanner on page 56.

Check white paper You must use plain, white paper when adjusting the scanner. document and try See Adjust the scanner on page 56.

again

Clean white roller, For more information, see Clean the document scanner area glass and try again on page 54.

Duplicated with

The same number has already been registered into another

[Speed No.xx]

speed dial location.

Exceeded Job Memory The machine can hold only 3 Favorites.

Exceeded Job Memory The broadcasting and delayed fax can hold 5 jobs in total. Cancel scheduled Cancel a scheduled job and try again.

job and try again

Ink Low. Install The print cartridge is low or has run out of ink. To install a new ink cartridge new print cartridge, see Replace the print cartridge on

page 48. Although this message is displayed, you can make a copy or print a report. Incoming faxes will be stored in memory. You must manually print them, see Reprinting faxes on page 44.

56 Care and maintenance