HP 600 manual Answer/receive mode, Set up distinctive ring Drpd answer mode

Answer/receive mode

4.Call the HP Fax.

DRPD OK will display when the pattern has been learned and the HP Fax will return to Ready mode.

Step 2—Set up distinctive ring (DRPD) answer mode

Once you have activated distinctive ring, it becomes one of the answering modes you can select by pressing the Mode/Contrast button.

SPress Mode/Contrast repeatedly until DRPD Mode appears in the display.

•In Ready mode, DRPD appears in the right hand corner of the display.

•Now, the HP Fax will manage calls and faxes as if it were set to AUTO mode (AUTO mode on page 33)

TIP: Distinctive ring must be set up again if you reassign your fax number or connect the machine to another telephone line. Once set up again (that is, the fax machine has learned the ring pattern and the answering mode is correctly set), you should test the fax machine by calling the fax number and another number on the same line. The machine should respond appropriately to a call placed to the fax number with fax tones, and to a normal telephone call with the expected ring pattern.

Answer/receive mode

How the product receives faxes depends on the answer/receive mode you chose when you set up the product. You can send faxes in any answer/receive mode. The answer/receive mode setting determines how the device answers the incoming call.

	How are you going to use your HP Fax?	Read about...
	• Fax machine with few or no voice calls.	FAX mode
	• Telephone and fax machine without an	AUTO mode
	external answering machine connected.
	• As a fax machine with an external	TAM mode
	answering machine.
	• Using Distinctive Ring (DRPD) service to	See Distinctive ring (DRPD)
	set up a separate telephone number for	on page 31.
	your fax on the same physical line as
	your other numbers.
	• Telephone with few or no fax calls.	TEL mode
32 Additional features