HP 600 manual Print quality problems, Problem Solution Light or blurred characters

Troubleshooting

Problem Solution

You cannot store a document in memory.

There may not be enough memory available to hold the document you want to store. If the display shows a Memory Full message, do the following until you can store your document in memory:

Print all unprinted faxes in memory (see Reprinting faxes on page 44.

Delete unneeded polling faxes, broadcast faxes, or delayed faxes (see To cancel the scheduled job on page 38).

Blank areas appear at the bottom of each page or on continuation pages, with only a small strip of material printed at the top.

You may have selected the wrong paper size setting. To select the proper paper size, see Paper Size on page 13.

Image TCR is not working	You have the resolution set to SUPER FINE. Set the resolution
	to FINE.

Print quality problems

Problem	Solution
Light or blurred characters.	Check ink level as described in View ink level on page 47. To
	install a new print cartridge, see Replace the print cartridge
	on page 48.
	Make sure the print cartridge is installed correctly. To clean
	the print cartridge, see Maintain the print cartridge on
	page 52.
Smudged or dark characters.	Make sure the paper is straight and unwrinkled. Let ink dry
	before handling the paper. To clean the print cartridge, see
	Maintain the print cartridge on page 52.
Characters with white lines.	If Ink Low. Install new ink cartridge is displayed,
	install a new print cartridge as described in Replace the print
	cartridge on page 48.
	Remove and reinstall the print cartridge.
	Clean the print cartridge (see Maintain the print cartridge on
	page 52).
Improperly formed or misaligned	Clean the print cartridge (see Clean the print cartridge on
characters.	page 52).
Abnormal black horizontal lines	Clean the cartridge carrier (see Clean the cartridge carrier
	contacts on page 53).
	Care and maintenance 61