ENGLISH
SETUP
After all components are connected, initial setup must be performed.
ONSCREEN DISPLAY MENU SYSTEM
This unit incorporates an onscreen menu system, which makes various operations possible by using the cursor (3, 4, 1 , 2) and OK/ENTER buttons on the remote controller or on the front panel.
Note:
• To view the onscreen displays, make certain you |
have connected the MONITOR OUT jack on the rear |
panel to the composite, |
or HDMI input of your TV or projector. (See page |
33, 34) |
1. Press the AMP button on the remote controller. |
(This step is not needed when operating the |
setup menus from the unit.) |
2. Press the MENU button on the remote controller |
or press the MENU button on the front panel. |
The “MAIN MENU” of the OSD menu system is |
displayed. |
There are 6 items in the MAIN MENU. |
3. Select the desired |
4 cursor buttons and press the OK/ENTER |
RC8001SR BUTTON CONTROL
CHVOL
LEFT button |
| OK |
|
OK button |
|
|
|
|
| LIP·SYNC |
|
| PREV |
| MUTE |
|
| GUIDE |
|
| MENU |
| EXIT |
| TEST | CH.SEL | SURR |
MENU button | 1 | 2 | 3 |
7.1CH | ATT |
4 5 6
Press this button to display the OSD menu system.
SR7002/SR8002 FRONT BUTTON CONTROL
UP button
RIGHT button
DOWN button
EXIT button
Press this button to exit the OSD menu system.
button. The display will change to the selected |
Notes:
•If you desire to adjust any
•To lock
<LOCKING SUBMENUS>
(1)Move the cursor to “1. INPUT SETUP” in the
MAIN MENU.
(2)Select the “0” mark left of “LOCKED” with the 1 or 2 cursor buttons.
4.To exit from OSD menu system, press the EXIT button, or move the cursor to EXIT and press the OK/ENTER button.
Note:
•Settings are entered with the ENTER button on the unit or the OK button on the remote controller. When using the remote controller, use the OK button as if it were the ENTER button.
|
| UP button | ENTER button |
| MULTI |
|
|
AUTO | MULTI SPEAKER | BAND | MEMORY |
| 7.1CH INPUT | DISPLAY |
|
THX |
|
| |
LEFT button | MENU | EXIT | RIGHT button |
|
| ENTER |
|
MIC
MENU button |
|
| EXIT button | |
Press this button to display the |
|
| Press this button to exit the | |
DOWN button | ||||
OSD menu system. | OSD menu system. |
AMP (Amplifier) button
TUNER CD
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8001SR
Learning Remote Controller
40