Marantz SR7002 English, •Multi Room Setup, •Dc Trigger Setup, HDMI LIP Auto Lipsync Correction

ENGLISH

5PREFERENCE

•MULTI ROOM SETUP :

“5-1 MULTI ROOM SETUP” (see page 55)

•DC TRIGGER SETUP :

“5-2 DC TRIGGER SETUP” (see page 55)

1. Select “5. PREFERENCE” from MAIN MENU with the 3 or 4 cursor buttons and press the

HDMI LIP (Auto Lipsync Correction):

Video signals may take longer to process than audio signals depending on the connected video equipment.

When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function.

Use the 1 or 2 cursor buttons to switch between ENABLE and DISABLE.

5 . PREFERENCE

MULTI ROOM SETUP A B

DC TRIGGER SETUP 1 2

STANDBY : NORMAL

BILINGUAL : MAIN

HDMI AUDIO: ENABLE

HDMI LIP : ENABLE

RETURN NEXT EXIT

OK/ENTER button.

5 . PREFERENCE

MULTI ROOM SETUP A B

DC TRIGGER SETUP 1 2

STANDBY : NORMAL

BILINGUAL : MAIN

HDMI AUDIO: ENABLE

HDMI LIP : ENABLE

RETURN NEXT EXIT

2. Select the desired menu with the 3 or 4 cursor buttons and press the OK/ENTER button.

STAND BY:

When this is set to “ECONOMY”, you can reduce the power consumption when the unit is in the Standby mode. When “ECONOMY” is selected, “TV AUTO” and “RS-232C” are disabled when the unit is in the Standby mode.

BILINGUAL:

In the Bilingual mode, Dolby Digital and DTS output is set to either “MAIN” or “SUB”. Select “BILINGUAL” with the 1 or 2 cursor buttons, then select MAIN ↔ SUB ↔ MAIN+SUB with the 1 or 2 cursor buttons.

HDMI AUDIO:

This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector.

ENABLE: The audio input to the HDMI jacks can be played back by this unit.

In such case, audio signals are not output to the TV or projector.

THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc.

After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.

ENABLE: Auto Lipsync Correction is used to synchronize audio and video.

DIESABLE: Deactivates this function.

Note:

•This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the user’s manual of the connected equipment.

•If this function is unavailable, you can use the regular lipsync function to synchronize audio and video. (See page 66)

DC TRIGGER SETUP DC TRIG - 1: DISABLE

TV	:		TAPE	:
DVD	:		CD/R	:
VCR1	:		AUX2	:
DSS	:		TUNER	:
AUX1	:		7 . 1CH	:
RETURN		BACK		EXIT
DC	TRIGGER SETUP
DC TRIG - 2:			DISABLE
TV	:		TAPE	:
DVD	:		CD/R	:
VCR1	:		AUX2	:
DSS	:		TUNER	:
AUX1	:		7 . 1CH	:
RETURN		BACK		EXIT

MULTI ROOM SETUP A

VIDEO	:	DVD
AUDIO	:DVD
SLEEP	:OFF

MONO/ST:STEREO
OSD INFO:ENABLE
MULT:OFF		MSPK:
VOL :VARI		VOL	:
LEV : - 90dB		LEV	:
RETURN	BACK		EXIT
MULTI	ROOM	SETUP B
AUDIO	:DVD
SLEEP	:OFF
MONO/ST:STEREO
MULT:OFF		MSPK:
VOL :VARI		VOL	:
LEV : - 90dB		LEV	:
RETURN	BACK		EXIT

(The SR7002 is not equipped with the MULTI ROOM SETUP B feature)

54