9. Checking Measurement Results
When calculations for the measurement results end, a screen appears for confirming the calculation results.
CHECK RESULT
SPEAKER CONFIG
SPEAKER SIZE
DISTANCE
CHANNEL LEVEL
CROSSOVER FREQ
STORE
EXIT
Select items to check with the 3/4 cursor buttons and press the OK/ENTER button to enter them.
Note:
To check equalizer (MultEQ) parameters, see page 57.
[Example] Confirmation screen for speaker detection
SPEAKER | CONFIG | |
CHECK | !! | SPEAKER |
FRONT | : | YES |
CENTER | : | NON |
FRONT R | : | YES |
SURR . R | : | YES |
SURR . B R : NON
SURR . B L : NON
SURR . L | : YES | |
SUB W | : YES | |
|
|
|
RETURN |
| NEXT |
[Example] Confirmation screen for the distance from speakers to the listening position
|
| DISTANCE | ||||
UNIT |
|
| : |
| ft |
|
FRONT | L |
| : | 30 . 00ft | ||
CENTER |
|
| : | 19 . 33ft | ||
FRONT | R |
| : | 29 . 66ft | ||
SURR . R |
|
| : | 21 . 50ft | ||
SURR . B |
| R | : | 12 . 33ft | ||
SURR . B |
| L | : | 11 . 66ft | ||
SURR . L |
|
| : | 16 . 33ft | ||
SUB W |
|
| : | 12 . 50ft | ||
RETURN |
|
|
| NEXT |
*The units can be changed by moving the cursor to [ft] of UNIT and pressing 1 / 2 the cursor buttons. Each time a 1 / 2 cursor button is pressed, the units alternate between [ft] (feet) and [m] (meters).
[Example] Confirmation screen for speaker size and
crossover frequency
SPEAKER |
| SIZE | |||
FRONT | L |
| : AUTO | ||
CENTER |
|
| : AUTO | ||
FRONT | R |
| : AUTO | ||
SURR . R |
|
| : AUTO | ||
SURR . B |
| R | : AUTO | ||
SURR . B |
| L | : AUTO | ||
SURR . L |
|
| : AUTO | ||
|
|
|
|
| |
RETURN |
|
|
| NEXT |
|
CROSSOVER FREQ | |||||
FRONT |
| : AUTO | |||
CENTER |
| : AUTO | |||
SURR |
| : AUTO | |||
SURR . B |
| : AUTO |
RETURN
*AUTO is displayed to indicate that the speaker size and crossover frequency results were automatically measured.
10. Storing Measurement Results in Memory
Once finished confirming the measurement results, select “RETURN” with the 3/4 cursor buttons and press the OK/ENTER button to display the CHECK RESULT screen.
| CHANNEL |
| LEVEL | ||
| FRONT | L | : | 0 | . 0dB |
| CENTER |
| : - 6 . 5dB | ||
| FRONT | R | : - 1 . 5dB | ||
| SURR . R |
| : | +1 | . 0dB |
| SURR . B | R | : | +9 | . 5dB |
| SURR . B | L | : | +12 | . 0dB |
| SURR . L |
| : - 2 . 5dB | ||
| SUB W |
| : - 12 . 5dB | ||
|
|
|
|
| |
| RETURN |
|
| NEXT EXIT |
CHECK RESULT
SPEAKER CONFIG
SPEAKER SIZE
DISTANCE
CHANNEL LEVEL
CROSSOVER FREQ
STORE
EXIT
Place the cursor on “STORE” and press the OK/ENTER button to store all parameters including the equalizer parameters in memory. If not wanting to store the calculation results in memory, place the cursor on “EXIT” and press
the OK/ENTER button.
Note:
Pressing “EXIT” prior to pressing “STORE” erases all measurement results and calculation results, therefore operate the remote controller with care.
When storing operations end, the following OSD appears on the display.
2 . SPKR SETUP
AUTO SETUP
MANUAL SETUP
THX AUDIO SETUP
RETURN | EXIT |
Notes:
•Do not turn the power to the unit off while storing parameters in memory. This may erase all data in the unit’s memory and may damage the unit.
•Please set any THX Certified speakers manually to “Small” and the crossover “80 Hz” after Auto setup operation.
ENGLISH
47