ST2 OPERATION
UNO-LRC1 REMOTE CONTROL WITH CAV6.6
UNO-LRC1 Remote Control Operation
Turning the unit on
The tuner is power managed by the CAV6.6 or other
Selecting the desired tuner
To select a tuner, push 
and choose the source number preassigned to Tuner 1 or Tuner 2, or use the
UNO numeric source inputs at the bottom of the
Selecting the desired band
Push 
to toggle between AM/FM reception.
Selecting the desired frequency
Use the Channel 
and 
or 
and
for manual tuning. To move quickly through the
stations, press and hold the button for more than 1.5
seconds. To directly select a station, enter the three-
or
European regions use
is reached, the tuner continues SEEK mode at the lowest frequency.
Frequency Scan
To scan, press and hold then release 
. The tuner scans through tuned stations with a
scanning, press 
again.
Selecting a Bank
To select a bank, press and hold 
for bank up
or 
for bank down.
Recalling a Memory Preset
Press 
and 
or 
and 
to scroll through a loop of all the memory presets for the cur- rently selected bank. Only configured presets will be displayed.
Mute
Press the 
button to mute/unmute the tuner audio output.
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select 
or 
or 
. To seek
higher frequency station press 
. Press 
for lower frequencies. Tuning begins at the current fre-
quency, seeks upward (or downward) and stops at the
next tuned station. Pushing 
or 
again con- tinues the SEEK function. Once the highest frequency
19
