Installation
Models IWF014, IWF018, IWF025 and IWF030 (M-speed)
CAUTION
Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.
SW020
Surface
The machine must be securely fixed on a flat surface (metal base, concrete or solid ground). The anchoring is to be done on the 6 provided places in the holes on the corners of the base. (See Mounting Bolt Hole Locations). Refer to Figure 32.
1
CHM2102N
1Mounting Bolt Holes
Figure 32
The machine must be placed entirely level. For easy maintenance it is recommended to keep a minimal distance of 23.62 in. (600 mm) between the wall and the back of the machine.
If several machines are placed next to each other, there should be a minimal distance of 1.18 in. (30 mm) between each machine.
Anchoring to Metal Base
The machines must be fixed on a metal base which is securely anchored on a concrete base. Refer to Figure 33.
| 1 | 2 |
|
| |
| 7 | 3 |
|
| |
| 2 |
|
6 | 3 | 4 |
| ||
5 |
|
|
|
| CHM2103N |
1 | Machine Base |
|
2 | Nut |
|
| .5 in. (M12) (Models IWF014, IWF018 and | |
3 | IWF025), .625 in. (M16) (Model IWF030) | |
Washer |
| |
| 1.57 in. x 0.60 in. x 0.15 in. |
|
4 | (40 mm x 17 mm x 4 mm) |
|
Bolt |
| |
5 | .625 in. x 2.5 in. (M16x60 mm) |
|
Bolt |
| |
| .5 in. (M12) (Models IWF014, IWF018 and | |
6 | IWF025), and .625 in. (M16) (Model IWF030) | |
Concrete Base |
| |
| 9.48 in. (250 mm) (Models IWF014, IWF018 | |
| and IWF025), and 13.77 in. (350 mm) | |
7 | (Model IWF030) |
|
Metal Base |
| |
Figure 33
55 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT |
