IPSO CHM2097N Models IWF033, IWF040, IWF055 and IWF075 (M-speed)

Washer-Extractors

5-08-51

Installation

Models IWF033, IWF040, IWF055 and IWF075 (M-speed)

Surface

The machine must be securely fixed on a flat surface

(metal base, concrete or solid ground). The anchoring

is to be done on the 6 provided places in the holes on

the corners of the base. (See Mounting Bolt Hole

Locations). Refer to Figure43.

Figure 43

The machine must be placed entirely level. For easy

maintenance it is recommended to keep a minimal

distance of 23.62 in. (600 mm) between the wall and

the back of the machine.

If several machines are placed next to each other, there

should be a minimal distance of 1.18 in. (30 mm)

between each machine.

Anchoring to Metal Base

The machines must be fixed on a metal base which is

securely anchored on a concrete base. Refer to

Figure44.

Figure 44

CHM2102N

1Mounting Bolt Holes

Ensure that the machine is installed on a

level floor of sufficient strength and that

the recommended clearances for

inspection and maintenance are provided.

Never allow the inspection and

maintenance space to be blocked.

SW020

CAUTION

CHM2102N

CHM2103N

1Machine Base

2Nut

.625 in. (M16)

3Washer

1.57 in. x 0.60 in. x 0.15 in.

(40 mm x 17 mm x 4 mm)

4Bolt

.625 in. x 2.5 in. (M16X60 mm)

5Bolt

.625 in. (M16)

6Concrete Base 15.74 in. (400 mm)

(Models IWF033, IWF040),

21.65 in. (550 mm) (Model IWF055), and

27.55 in. (700mm) (Model IWF075)

7Metal Base

CHM2103N