NEC LCD1770V user manual MultiSync LCD 1770NXM, Specifications -continued, Monitor

Specifications –continued

Monitor			MultiSync® LCD1770NXM		Notes
Specifications			Monitor
LCD Module		Diagonal :	17.0 inch	Active matrix; thin film transistor (TFT)
	Viewable Image Size :		17.0 inch	liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count) :			1280 x 1024	pitch; 250cd/m2 white luminence;
				500:1 contrast ratio, typical
Input Signal		Video :	ANALOG 0.7 Vp-p/75 Ohms	Digital Input: DVI
		Sync :	Separate sync. TTL Level
			Horizontal sync. Positive/Negative
			Vertical sync. Positive/Negative
Display Colors			16,194,277	Dependent on display card used.
Maximum		Left/Right :	80°/80° (CR>5)
Viewing Angles		Up/Down :	85°/75° (CR>5)
Synchronization		Horizontal :	31.5 kHz to 81.0 kHz (Analog)	Automatically
Range			31.5 kHz to 69.0 kHz (Digital)	Automatically
		Vertical :	56.0 Hz to 75.0 Hz	Automatically
Resolutions Supported			720 x 400*1 :VGA text	Some systems may not support all modes listed.
			640 x 480*1 @ 60 Hz to 75 Hz
			800 x 600*1 @ 56 Hz to 75 Hz
			832 x 624*1 @ 75 Hz
			1024 x 768*1 @ 60 Hz to 75 Hz
			1152 x 870*1 @ 75 Hz
			1280 x 1024 @ 60 Hz to 75 Hz (Analog)	......... NEC-Mitsubishi Electronics Display cites
			1280 x 1024 @ 60 Hz (Digital)	recommended resolution at 60 Hz for
				optimal display performance.
Active Display Area		Horizontal :	337.9 mm/13.3 inches
		Vertical :	270.3 mm/10.6 inches
USB Hub		I/P:	USB Specification Revision 2.0
		Port:	Upstream 1
			Downstream 4
		Load Current:	Maximum 0.5A per port
Speakers	Practical Audio Output:		2.0 W + 2.0 W
Power Supply			100 Ð 240 V ~ 50/60 Hz
Current Rating			0.7 Ð 0.36A
Dimensions			367.0 mm (W) x 368.6-472.5 mm (H) x 198.0 mm (D)
			14.4 inches (W) x 14.5-18.6 inches (H) x 7.8 inches (D)
Weight			6.5 kg
			14.3 lbs
Environmental Considerations
	Operating Temperature :		5°C to 35°C/41°F to 95°F
		Humidity :	30% to 80%
		Feet :	0 to 10,000 Feet
	Storage Temperature :		-10°C to 60°C/14°F to 140°F
		Humidity :	10% to 85%
		Feet :	0 to 30,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

16

LCD17PISAManual080604.p65 16 8/6/04, 5:15 PM