Specifications

Specifications

Monitor

 

MultiSync® LCD1770V

Notes

Specifications

 

Monitor

 

LCD Module

Diagonal :

17.0 inch

Active matrix; thin film transistor (TFT)

Viewable Image Size :

17.0 inch

liquid crystal display (LCD); 0.264 mm dot

Native Resolution (Pixel Count) :

1280 x 1024

pitch; 250cd/m2 white luminence;

 

 

 

450:1 contrast ratio, typical

Input Signal

Video :

ANALOG 0.7 Vp-p/75 Ohms

 

 

Sync :

Separate sync. TTL Level

 

 

 

Horizontal sync. Positive/Negative

 

 

 

Vertical sync. Positive/Negative

 

Display Colors

 

16,194,277

Dependent on display card used.

Maximum

Left/Right :

80°/80° (CR>5)

 

Viewing Angles

Up/Down :

75°/70° (CR>5)

 

Synchronization

Horizontal :

31.5 kHz to 81.0 kHz

Automatically

Range

Vertical :

56.0 Hz to 75.0 Hz

Automatically

Resolutions Supported

 

720 x 400*1 :VGA text

Some systems may not support all modes listed.

 

 

640 x 480*1 @ 60 Hz to 75 Hz

 

 

 

800 x 600*1 @ 56 Hz to 75 Hz

 

 

 

832 x 624*1 @ 75 Hz

 

 

 

1024 x 768*1 @ 60 Hz to 75 Hz

 

 

 

1152 x 870*1 @ 75 Hz

 

 

 

1280 x 1024 @ 60 Hz to 75 Hz .......................... NEC-Mitsubishi Electronics Display cites

 

 

 

recommended resolution at 60 Hz for

 

 

 

optimal display performance.

Active Display Area

Horizontal :

337.9 mm/13.3 inches

 

 

Vertical :

270.3 mm/10.6 inches

 

Power Supply

 

100 Ð 240 V ~ 50/60 Hz

 

Current Rating

 

0.7 Ð 0.36A

 

Dimensions

 

367.0 mm (W) x 362.5-472.5 mm (H) x 198.0 mm (D)

 

 

14.4 inches (W) x 14.3-18.6 inches (H) x 7.8 inches (D)

Weight

 

6.0 kg

 

 

 

13.2 lbs

 

Environmental Considerations

 

 

 

Operating Temperature :

5°C to 35°C/41°F to 95°F

 

 

Humidity :

30% to 80%

 

 

Feet :

0 to 10,000 Feet

 

Storage Temperature :

-10°C to 60°C/14°F to 140°F

 

 

Humidity :

10% to 85%

 

 

Feet :

0 to 30,000 Feet

 

 

 

 

 

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical specifications are subject to change without notice.

14

LCD17PISAManual080604.p65

14

8/6/04, 5:15 PM

Page 16
Image 16
NEC LCD1770V, LCD1770NX, LCD1770NXM user manual Specifications, Monitor, MultiSync LCD1770V