Specifications

Product specifications

LCD display

18.1inches (46 cm measured diagonally) Super-V and Anti Glare Low Reflection TFT LCD module

Resolution (max.)

SXGA 1280 x 1024 pixels

Displayable colors (max.)

16.77million colors (8 bit) Brightness (max.)

200cd/m2 Dot pitch

0.2805(H) 0.2805(V) mm Contrast ratio

350:1 Angle of visibility

Left-right 150°; Up-down 150° Screen display size

Horizontal 359 mm x Vertical 287.2 mm

Video signal

Analog: Analog RGB (0.7Vp-p) [75]

Digital: DVI standard based on 1.0 Sync signal

Separate Sync (TTL level: +/-), Sync on

Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital screening (enlargement of display to correct VGA/SVGA/XGA)

[1:1, expansion (fixed aspect ratio), expansion (total screen surface)]

Plug & Play

 

VESA:

DDC1/DDC2B compatible

Power management

VESA:

based on DPMS

DVI:

based on DMPM

Input signal terminal

Analog: 15 pin mini D-sub (3 rows) Digital / Analog:29 pin DVI-I

USB hub function

1 upstream port, 2 downstream ports (bus- powered hub based on USB standard Rev 1.1)

Screen tilt

Upward 0° -30°; downward 0° - 5° Screen swivel

90° from left through right Power supply

AC100-240V, 50/60Hz (Use special AC adapter, type NL-A03E of Sharp Corporation.)

Temperature of operating environment 5 - 35°C

Power consumption

Maximum 44W (3.2W when in power-saving mode)

(Use special AC adapter.) Dimensions (W x D x H)

443 mm x 218 mm x 465 mm Weight (excluding AC adapter)

Approx. 10.1 kg

Display area only, approx. 7.8kg

Dimensions (Units: mm)

Length of analog signal cable: approx. 2.0 m*

Length of USB cable included: approx. 1.8 m

*Length from analog signal input terminal

Special AC adapter

Approx. 2.0 m

Approx. H 120 mm x D 60 mm x H 35 mm

Digital signal cable (NL-C01E): Approx. 2.0 m

Analogue signal cable (NL-C02E): Approx. 2.0 m

26

Page 26
Image 26
Sharp LL-T1811W operation manual Specifications, Product specifications