Connecting the monitor and turning the monitor on and off
English
Connecting the monitor to a computer (PC etc.)
Connect using this device’s analogue signal cable
Connect this device’s analogue signal cable to the computer (PC etc.).
When connecting, ensure that both the monitor and computer are switched off.
Be careful not to overly bend the cable or add extension cords as this could lead to malfunction.
Firmly insert the analog RGB output terminal (mini
Analog signal cable
Connect using a display cable (to be purchased separately)
-Using a display cable (to be purchased separately), it can be connected to the computer’s (PC etc.) digital RGB output terminal or analogue RGB output terminal.
-To connect to a digital RGB output terminal: Digital signal cable (model name:
-To connect to an analogue RGB output terminal: Analogue signal cable (model name:
-For a digital signal input: It can be connected to a computer with a
-Be careful not to overly bend the cable or add extension cords as this could lead to malfunction.
1. Remove the cover
(Rear View)
Cover
If connecting to a
Macintosh conversion adapter
Analog signal cable
After connecting the adapter, tighten the screws on each side to fix into place.
2.Connect the display cable (to be purchased separately) into the
Display cable (to be |
purchased separately) |
Note: | To the computer's | |
RGB output terminal | ||
- If connecting to the Sun Ultra series, a | ||
| ||
conversion adapter (purchased separately) may |
|
be required.
3. Replace the cover.
13
