Sharp LL-T1811W Adjusting the screen display when using a digital signal, MODE SELECT Menu

Adjusting the screen display (when using a digital signal)

MODE SELECT Menu	COLOR MODE
	If this is set on [STD], the original color scheme of
	the LCD monitor will be displayed. If this is set on
	[sRGB], the colors of will be corrected according to
	the computer image. (	buttons)

Note:

- To set [COLOR MODE] to [sRGB], set the [WHITE BALANCE] to [STD].

Notes:

-Depending on the resolution of the input signal, even if menu options can be selected, the display may not change.

-To choose a menu option: SELECT button

-When adjustment complete:MENU button

OSD H-POSITION (OSD horizontal position)

The position of the OSD display can be moved to the

left and right. ( buttons)

OSD V-POSITION (OSD vertical position)

The position of the OSD display can be moved up

and down. ( buttons)

EXPAND (Screen expansion)

For display modes of less than 1280 X 1024 pixels,

the display can be expanded if desired. ( but- tons)

OFF: Expansion off

ON1: Using the fixed aspect ratio, the entire screen is enlarged.

ON2: The entire screen is enlarged.

Note:

-If a resolution of 1280 X 1024 pixels cannot be achieved even after expansion is attempted, the screen's perimeter will display black. (This is not a malfunction.)

SCALING (Level of scaling)

If [EXPAND] is set on [ON1] or [ON2], the sharpness

of the image can be adjusted. ( buttons)

Note:

-If [EXPAND] is set on [OFF], [SCALING] cannot be adjusted.

24