
Adjusting the screen display
For analog signal
1.First perform an automatic adjustment. (p. 19)
2.Perform manual adjustment where necessary. (p. 20)
For digital signal
The monitor can generally be used without adjustment. If necessary perform manual adjust- ment. (p. 23)
Note:
-All adjustments will be saved even after turning the power off.
Adjusting the backlight
The backlight brightness can be adjusted. Carry out the commands without the On Screen Display (OSD) Menu displayed. If the OSD Menu is displayed, press the MENU button (several times may be required) and begin when the OSD Menu has disappeared.
1.Without the OSD Menu being displayed, push the or the
button. At the bottom of the screen the BRIGHT bar will appear.
2.Adjust by pressing the button (darker) or
button (lighter).
The BRIGHT bar automatically disappears approxi- mately 5 seconds after the last command.
ADJUSTMENT menu reset
The adjustment values of the analogue signal time’s ADJUSTMENT menu can be returned to their original
1.Turn on the monitor power.
2.Press the MENU button and the button simultaneously. When [RESET] appears on the screen, the reset is complete.
Resetting all adjustment values
All adjustment values can be returned to their original
1.Turn off the monitor power.
2.Press the MENU button and the SELECT button simultaneously, and while doing this press the power button (i.e. turn the power on). When [ALL RESET] appears on the screen, the reset is complete.
Note:
-While ALL RESET is displayed, the control buttons are disabled.
-It is not possible to reset values when the adjustment lock is in place. Remove the adjustment lock before attempting to operate control buttons.
Adjustment lock function
By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided.
1.Turn off the monitor power.
2.While pressing the MENU button, press the power button (i.e. turn the power on). Continue to press the button until the message appears on the screen.
When the menu is unlocked: [ADJUSTENT LOCKED] will appear on the screen, and the lock will be set.
When the menu is locked:
[ADJUSTENT UNLOCKED] will appear on the screen, and the lock will be removed.
Note:
-When the lock is in place, all buttons other than the power button are disabled.
Choosing a message language
Messages displayed on the screen and OSD Menu contents can be changed to the following languages. Dutch, English, French, German, Spanish, Italian, Swedish.
1.Turn off the monitor.
2.Pressing the and
buttons simultaneously, press the power button (i.e. turn the power on). The Language Selection Menu (LANGUAGE) will be displayed on the screen.
3.Use the SELECT button to choose a language.
4.Press the MENU button.
The setting is complete. From now, messages and adjustment menus will be displayed in the chosen language.
Note:
-The language selection menu disappears approximately 30 seconds after the last command has been made.
18