Setup | Multiquip GBC specs

setup

1.Set the GBC cart on a firm level surface where there is enough space around the cart for the outriggers to be deployed.

2.Insert the T-handle into the handle holder on the cart. Tighten with the wing bolt. See Figure 4.

T-HANDLE

HANDLE

HOLDER

WASHER WING

BOLT

Figure 4. T-Handle Installation

3.Insert the mast into the mast holder and secure with lever as shown in Figure 5.

MAST

HOLDER

LEVER

Figure 5. Inserting the Mast Into Holder

4.If desired, attach an optional extension pole to the top of the mast as shown in Figure 6.

EXTENSION

POLE

BOLT

Figure 6. Extension Pole Attachment

5.Insert the balloon assembly into the mast. Tighten the T-bolt securely. See Figure 7.

BALLOON

PROTECTIVE

COVER

T-BOLT

MAST

Figure 7. Installing the Balloon

6.Unsnap the three buttons on the bottom of the balloon cover and unzip the cover. See Figure 8.

ZIPPER

BUTTON

Figure 8. Unzipping Balloon Cover

7.Fold the balloon cover into itself and zip it up. See Figure 9.

FOLD PROTECTIVE

COVER INTO ITSELF

ZIPPER

BALLOON

FULLY

EXPOSED

Figure 9. Folding Balloon Cover

page 18 — GBC lighting system • operation and parts manual — rev. #0 (06/24/13)

Image 18

Multiquip GBC manual Setup, Fold the balloon cover into itself and zip it up. See Figure

Contents

Model GBC This Manual Must Accompany the Equipment AT ALL TimesPage Page Fuel Chemical Warning Table of Contents GBC Lighting System Choose from three easy options Safety Information SaFety messagesSaFety symBols General saFety  never attempt service on a running machine Lighting system saFetyLamp saFety  never unplug the lamp’s AC power cable during operation EleCtriCal saFety Balloon saFetyGenerator saFety Power Cord/Cable safety Transporting saFety Cart type no lifiting hook Specifications Dimensions Dimensions Footcandle plot Illumination Range General information 230V 50 Ft 100 Ft 200 Ft 300 Ft 400 Ft 500 Ft 600 Ft 800 Ft Components GBC Components AC Power Cable Connects to the AC power source Setup Fold the balloon cover into itself and zip it up. See Figure Securing Cable with Hook Releasing Parking Brake OperationApplying Parking Brake Deploying outrigger Stowing Outrigger Raising the mast Dimming the Lamp Applying PowerLowering the Mast Start the generator as indicated in the generator manual Shutdown Turn off the power switch of the generatorDisconnect the lamp connector from the AC power cable Storage Maintenance Replacing LampRemove the lamp guard Figure Replacing Balloon Unzip the top and bottom of the balloon. See FigureZip up the top and bottom of the new balloon. See Figure Filter replacement Locking Air Plate Unplug all other appliances Loose?Lamp does not light Wait for lamp to cool down C11 C10 C5 C8 Power cable Defective or worn cable? Replace Plug Adjust Link for front shaftSpray grease Brake Not working properly? Adjust Lamp Base Lamp base loose? Screw in securely Wiring diagram Page Explanation of Code in Remarks Column Suggested Spare Parts GBC lIGHTING System 1 to 3 units Nameplate and decals A400324000 A400324800A400324500 A400324600 Balloon and lamp assy Part Name QTY Remarks Mast assy A300175600 A300175400A300175500 A400199700 Base assy A300147301 A100064700A300147201 A300056800 Outrigger assy A400175302 A3001622021641001430 A400176901 Terms and Conditions of Sale Parts Freight poliCyPage HERE’S HOW to GET Help