maintenance

NOTICE

Do not use excessive force when screwing the lamp to prevent lamp from breaking.

6.Reinstall lamp guard.

7.Pull down balloon and zip the bottom zipper to cover lamp.

REPLACING BALLOON

1.Unzip the top and bottom of the balloon. See Figure 31.

3.Slide in the new replacement balloon over the top of the lamp guard assembly. See Figure 33.

INSTALL NEW

BALLOON

Figure 33. Replacing Balloon

4. Zip up the top and bottom of the new balloon. See Figure 34.

UNZIP TOP AND

BOTTOM ZIPPERS

BALLOON

ZIP UP

NEW BALLOON

Figure 31. Unzipping Balloon

2. Slide out the old or worn balloon over the top of the lamp guard assembly. See Figure 32.

Figure 34. Zipping Up New Balloon

REMOVE OLD

BALLOON

Figure 32. Removing Old Balloon

gbc lighting system • operation and parts manual —rev. #0 (06/24/13) — page 25

Page 25
Image 25
Multiquip GBC manual Replacing Balloon, Unzip the top and bottom of the balloon. See Figure