Dell WorkStation 210 manual Corrupted or deleted from, Lowing procedure, Database, Backup diskette

7DEOH0HVVDJH&￿￿￿&RQILJXUDWLRQ8WLOLW\3UREDEOH0HVVDJHV&DXVH￿FRQWLQXHG￿		&RUUHFWLYH$FWLRQ
The configuration (.cfg)	This message appears	You can get a copy of the configuration
file used by the ICU for	when you try to add a listed	file from the original ISA Configuration
this card is now invalid	card and the configuration	Utility Diskette that you used to create
or does not exist. Do you	file for this card has been	the backup ICU diskette. Use the fol-
wish to load the file?	corrupted or deleted from
		lowing procedure:
	the database.
No configuration (.cfg)	This message appears	1.	Insert the original ISA Configura-
			tion Utility Diskette into drive A.
file exists for the card	when you modify a card
being modified. Do you	and its configuration file	2.	Change to the GEsubdirectory on
want to load one?	does not exist or has been		the diskette drive.
	deleted.
		3. UseLFX￿QG[a text editor to search the
			file for the card ID of the card
			you want to add or modify.
			The name of the configuration file
			is part of this card ID. For example,
			if the card ID is ICU0200, the con-
			figuration file is !icu0200.cfg.
		4. Copy the configuration file from
			the original ICU diskette to the
			backup diskette.
This is an EISA system.	This message appears if	To use the ICU, you must load the utility
Use an ECU, not the ICU,	you attempt to run the ICU	onto a non-EISA system.
to configure your system.	on an EISA system.
You have added a card	This message can appear in	Make a note of the new card configura-
using settings different	two situations:	tion shown in the Card Resource
from factory default.	‡ You added an ISA	Usage dialog box displayed after this
Reconfigure the card to		message. Change jumper settings on
the settings in the next	expansion card,	the ISA expansion card to match the
display (see the card’s	selected OK, and the	new card configuration.
manual) before install-	ICU had to use
ing it.	resource values differ-

ent from the card’s defaults to avoid conflicts.

‡ You added an ISA expansion card, selected Advanced, and chose resource values different from the card’s defaults.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.

C-6 Dell Precision 210 Desktop Systems User’s Guide