Dell WorkStation 210 manual Battery

correct settings. See Chapter 3, “Using the System Setup Program,” for instructions.

2.Remove the computer cover according to the instructions in “Removing the

LQVWUXFWLRQV&Computer$87,21￿Cover”6HHDWWKH¥3URWHFWLQJin ChapterIURQWRIWKLV7$. JDLQVW(OHFWURVWDWLFJXLGH￿ 'LVFKDUJHµLQWKHVDIHW\

3.To access the battery on the system board, rotate the power supply as described in “Rotating the Power Supply Away From the System Board” in Chapter 7.

NOTE: If a CD-ROM drive or hard-disk drive in the upper 5.25-inch drive bay obstructs your access to the battery, you may find it helpful to slide the drive for- ward slightly to provide more room for you to work. See the section in Chapter 9 titled “Installing a Drive in a 5.25-Inch rive Bay” for instructions.

4.Locate the battery and remove it.

The battery is mounted in a socket labeled “BATTERY” at the upper front-right

V\VWHPDWWHPSWLQJFDUHIXO&cornerKHREMHFW$87,21ERDUGofERDUGQRWthe￿LVLQVHUWHG,I\RXSU\E\WRWRsystem￿WRXFKWKHV\VWHPSU\LQJRIIRXWboardKHEHWZHQWKH(asWKHEDWWHU\youVRFNWKHfaceR￿DUGXW2WKHUZLVEDWWHU\DQGRUE\theRILWVZLWKsideEUDNLQJVRFNHWWKHREMFWof￿\RXPD\GDPJHtheWKZLWKHsystem)VRFNHWFLUFXLW￿0DNHEOXQWEMHFW(seeWUEHIRUHDFHUWDLQWKDWFHVFigureWKHRQWKH8￿V\V-EH1).￿

Pry the battery out of its socket with your fingers or with a blunt, nonconductive object, such as a plastic screwdriver (see Figure 8-9).

)LJXUHBATTERY socket

battery

5.Install the new battery.

Orient the battery with the side labeled “+” facing up. Then insert the battery into the socket, and snap it into place.

8-14 Dell Precision 210 Desktop Systems User’s Guide