power input connector

DC power

cable

interface

connector

 

EIDE cable

 

)LJXUHfor￿￿￿￿additional$WWDFKLQJdrive

 

8.Connect the appropriate interface cable to the interface connector on the back of the drive (see Figure 9-8).

If your system came with an EIDE CD-ROM drive, use the spare connector on

the existing interface cable. Otherwise, use the EIDE cable provided in the drive

V\VWHPWKH&kit.$87,21GULYH￿￿￿VLQWHUIDFH<RXPXVWPDWFKFRQQHFWRUWKHFORUHGVWULSWRDYRLGSRVVLEOHRQWKHGDPDJHFDEOHZLWKWR\RXUSLQ￿RQ

9.For an EIDE drive or CD-ROM drive, connect the other end of the interface cable to the interface connector labeled “IDE2” on the system board (see Figure 8-1).

For a diskette drive, connect the cable from the drive to the interface connector labeled “DISKETTE” on the system board.

For a drive that comes with its own controller card, connect the other end of the interface cable to the controller card.

Check all cable connections. Fold cables out of the way to provide airflow for the fan and cooling vents.

10.If the 5.25-inch drive bay was previously empty, remove the front-panel insert from the front cover.

See “Removing and Replacing Front-Panel Inserts” found earlier in this chapter.

9-8 Dell Precision 210 Desktop Systems User’s Guide

Page 140
Image 140
Dell WorkStation 210 manual LJXUHforadditional$WWDFKLQJdrive