&RQILJXULQJWKH1,&
This section provides instructions for configuring the computer’s integrated,
‡
‡
‡
Microsoft Windows NT 4.0
Microsoft Windows 95
Microsoft Windows 98
NOTE: If you reinstall Windows NT 4.0, you must install Service Pack 3 and the
:LQGRZV171,&'ULYHU
The Windows NT 4.0 operating system automatically detects and installs the NIC driver. To reinstall the driver, complete the following steps:
1.Use the Program Diskette Maker (located in the Dell Accessories program folder) to make a diskette copy of the NIC drivers installed on your
2.Connect the network cable to the back of your computer.
See “Network Cable Requirements” found earlier in this chapter for detailed instructions.
3.Verify that the NIC is enabled in the System Setup program. See “NIC” in Chapter 3 for more information.
4.Start the Windows NT operating system, and log in as user Administrator or as a user with Administrator privileges.
For information on administrative users and privileges, see your Windows NT documentation.
5.
NOTE: If you are installing networking on your system for the first time, the Win- dows NT operating system displays a message asking if you want to install networking. Click Yes, and refer to your Windows NT documentation for instructions.
6.Click the Adapters tab in the Network Control Panel, and then click Add to access the Select Network Adapter window.
7.Click Have Disk. Insert the NIC driver diskette 2 into drive A, type a:\, and then click OK.
The Select OEM Option dialog box appears.
8.Select 3Com Fast EtherLink/EtherLink XL PCI Busmaster NIC (3C905B) for the
