Dell WorkStation 210 Nvram failed Your system NVRAM. See the chapter, Instructions, Activated

7DEOH0HVVDJH&￿￿￿&RQILJXUDWLRQ0DQDJHU3UREDEOH0HVVDJHV&DXVH ￿FRQWLQXHG&RUUHFWLYH￿ $FWLRQ

ERROR: Could not read	An attempt to read the	See the chapter titled “Getting Help” in your
NVS, Error=Internal	NVRAM failed.	Diagnostics and Troubleshooting Guide for
Error Code.		instructions on obtaining technical assistance.
ERROR: Failed NVS	An attempt to write to	Run the Dell Diagnostics to verify the integrity
write. Error=Internal	NVRAM failed.	of your system NVRAM. See the chapter
Error Code.		titled “Running the Dell Diagnostics” in your
		Diagnostics and Troubleshooting Guide for
		instructions.
		If you are unable to determine the cause of
		the error, see the chapter titled “Getting
		Help” in your Diagnostics and Troubleshooting
		Guide for instructions on obtaining technical
		assistance.
ERROR: Failed to acti-	A Plug and Play expansion	Use the following procedure:
vate device, CSN=Card	card could not be	1.	Exit the ICU and turn off your system.
Select Number.	activated.
		2.	Remove the Plug and Play expansion
			card that could not be activated.
			Follow steps 2 through 5 of “Removing
			an Expansion Card” in Chapter 8, and
			then return to this procedure.
		3.	Reinstall the Plug and Play expansion
			card.

Follow steps 4 through 8 of “Installing an Expansion Card” in Chapter 8, and then return to this procedure.

If you still receive the error message, contact the manufacturer of the Plug and Play expan- sion card for assistance.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.

C-8 Dell Precision 210 Desktop Systems User’s Guide