Dell WorkStation 210 manual 9LGHR&RQQHFWRU, Rqqhfwruv

9LGHR￿&RQQHFWRU

For information on your video connector, see the manufacturer’s specifications that accompanied your video card.

1,&￿&RQQHFWRU

Your system contains an RJ45 connector (see Figure B-7) on the back panel for attach- ing an unshielded twisted pair (UTP) Ethernet cable, which is used in 10BASE-T and 100BASE-TX networks. The network interface controller (NIC) provides all the func- tions normally handled by a separate network expansion card. To connect your system to and configure it for use on an Ethernet network, see Chapter 5, “Using the )LJXUHNetwork%Interface￿￿￿1,&Controller&RQQHFWRU.”

6%￿&RQQHFWRUV￿

Your system contains two Universal Serial Bus (USB) connectors for attaching USB- compliant devices. USB devices are typically peripherals such as keyboards, mice,

GHYLFHVIRUWKHLU86%SRUWVWRWKDW&printers,$￿￿87,21GUDZYROWVand￿D'R￿computer9PD[LPXPVKXW￿￿QRW$PD[LPXPWWDFKLQJGRZQDWWDFKspeakersFXUUQW￿6HDGYLFV86%HFXUUHQ.WKHRYHUGYLFHGRFXPHQWDWLRQKUDWLQJV￿￿￿H[FHHGRUPLOOLDPSHUHV￿FRELQDWLRQWKLVWKUHVKROGWKDWDFFRPSDQLHG￿PRI$￿86%PD\HUFKDQQOGHYLFHVFDXVWKHWKH86%

If you reconfigure your hardware, you may need pin number and signal information for the USB connectors. Figure B-8 illustrates the pin numbers for the USB connectors, and Table B-7 lists and defines the pin assignments and interface signals for the USB connectors.

B-12 Dell Precision 210 Desktop Systems User’s Guide