Dell WorkStation 210 manual Card Configuration Dialog Box, Available Settings List Box

Figure 4-3.	Card Configuration Dialog Box	. 4-7
Figure 4-4.	Configuration Settings Dialog Box for Assigning an IRQ Line	. 4-7
Figure 4-5.	Available Settings List Box	. 4-8
Figure 4-6.	Configuration Settings Dialog Box for Assigning a DMA Channel. .	. 4-8
Figure 4-7.	Specify Interrupt Dialog Box	4-10
Figure 4-8.	Specify Interrupt List Box	4-10
Figure 4-9.	Specify I/O Port Dialog Box	4-10
Figure 4-10.	System Resource Usage Dialog Box	4-13
Figure 4-11.	Card Resource Usage Dialog Box	4-14
Figure 5-1.	NIC Connector and Indicators	. 5-2
Figure 5-2.	NIC Pop-up Window	. 5-7
Figure 6-1.	Audio Connectors	. 6-1
Figure 7-1.	Padlock Installed	. 7-3
Figure 7-2.	Removing the Computer Cover	. 7-3
Figure 7-3.	Replacing the Computer Cover	. 7-4
Figure 7-4.	Computer Orientation View	. 7-5
Figure 7-5.	Inside the Chassis	. 7-6
Figure 7-6.	Rotating the Power Supply	. 7-7
Figure 8-1.	System Board Features	. 8-2
Figure 8-2.	Expansion Cards	. 8-3
Figure 8-3.	Removing the Filler Bracket	. 8-4
Figure 8-4.	Installing an Expansion Card	. 8-5
Figure 8-5.	DIMMs and DIMM Sockets	. 8-7
Figure 8-6.	Installing a DIMM	. 8-9
Figure 8-7.	Removing a DIMM	8-10
Figure 8-8.	SEC Cartridge/Heat Sink Assembly Removal	8-11
Figure 8-9.	System Battery and Battery Socket	8-14
Figure 9-1.	Drive Locations	. 9-2
Figure 9-2.	Removing the Front-Panel Insert for a 5.25-Inch Bay	. 9-3
Figure 9-3.	DC Power Cable Connector	. 9-3
Figure 9-4.	Drive Interface Connectors	. 9-4
Figure 9-5.	Removing a Drive	. 9-6
Figure 9-6.	Attaching the Drive Bracket to the New Drive	. 9-6
Figure 9-7.	Inserting the New Drive Into the Drive Bay	. 9-7
Figure 9-8.	Attaching EIDE Drive Cables	. 9-8
Figure 9-9.	Removing the Hard-Disk Drive Bracket	9-11
Figure 9-10. Inserting a 1-InchHard-Disk Drive Into the Bracket		9-11
Figure 9-11. Inserting the Hard-Disk Drive Bracket Into the Chassis		9-12
Figure 9-12.	Attaching Hard-Disk Drive Cables	9-13
Figure B-1.	System Board Jumpers	. B-3
Figure B-2.	I/O Ports and Connectors	. B-6
Figure B-3.	Pin Numbers for the Serial Port Connectors	. B-8
Figure B-4.	Pin Numbers for the Parallel Port Connector	. B-9

xxii