Dell WorkStation 210 manual No more values are avail, Able for the resource you

7DEOH0HVVDJH&￿￿￿&RQILJXUDWLRQ8WLOLW\3UREDEOH0HVVDJHV&DXVH￿FRQWLQXHG￿ &RUUHFWLYH$FWLRQ

The loaded card is not a category card. Press OK to proceed.

The category you have chosen is not the correct category under which to add this card.

Select OK. The ICU automatically opens the correct category’s dialog box. Continue the procedure for adding the card as described in “Adding a Listed Card” or “Adding an Unlisted Card” in Chapter 4.

No more DMA values can be	No more values are avail-
added.	able for the resource you
	are trying to add or modify.
No more interrupt values
can be added.
No more memory values can
be added.
No more I/O port values
can be added.

The maximum number of values for each resource is as follows:

‡4 DMA channels

‡7 IRQ lines

‡9 memory address blocks

‡20 I/O ports

To free values for the resource you are trying to add or modify, delete some of the values listed in the resource box for the card. If your card requires all of the values listed, contact your card manu- facturer to resolve the issue.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.

C-4 Dell Precision 210 Desktop Systems User’s Guide