Adaptec ANA-62000, ANA-69000 Copying and Saving the Configuration

11-16
DuraLAN Fast Ethernet NICs User’s Guide
Copying and Saving the Configuration
Once you have established and verified all port and group
configurations in lbsetsf, you are ready to install program and
configuration related files to the server.
1From the Main Menu, select Install Software, and then press
Enter.
2In the Copy New Files box, select Yes, and then press Enter.
Figure 11-29. Copy New Files Box
3From the Main Menu, press Esc to exit the program.
4In the Save box, select Save and Quit to save the configuration
in sys:\etc\configsf.ncf and quit the program.
– If you do not want to save the changes, select Quit without
Saving, and then press Enter.
– If you wish to return to the Main Menu, select Return to
Prev ious Menu, and then press Enter.
5Restart the server.
– In NetWare 4.x:
aAt the system console prompt, type Down, and then
press Enter.
bType Restart Server.
– In NetWare 5.0:
aAt the system console prompt, type restart server, and
then press Enter.
6Cont inue to Viewing System St atus on page 11-17.
Copy New Files?
No
Yes