8-6
DuraLAN Fast Ethernet NICs User’s Guide
3In the Available Adaptec Ports box, click the available port to
add to the group, and then click Add.
4Repeat step 3 for each additional port.
Note: You mus t assign the same connection type to
each port in the same group.
OPTIONAL. To remove a port f ro m the group, click th e
appropriate port from the Group Ports box, and then click
Remove.
5When you are finished configuring the group, click Apply.
6To create another group, repeat steps 1 through 5.
7If you want to rename a group:
aSelect the default group name in t he Group(s) li st box .
bType the new name.
cClick Apply.
8When you are finished configuring all groups, click OK.
9If SNMP is not set up on the computer, you will receive the
message below. Click OK.
Figure 8-4. This message may be ignored during this
installation.