Adaptec ANA-62000, ANA-69000 - page 80

7-6
DuraLAN Fast Ethernet NICs User’s Guide
Windows NT 3.51
To create Failover pairs, follow these steps:
1From the Available Adaptec Ports box, click the p ort you wan t as the
primary port.
Figure 7-5. Configuration Tab
2Click Add. The port is added under Primary Port in the Failover Pair
list.
3To assign a backup to the primary port, click the appropriate port
from the Available Adaptec Ports box, and then click Add. The port
is added in the Backup Port field.
4Click Apply.
5OPTIONAL. Repeat steps 1 through 5 to create another Failover pair.
6OPTIONAL. To remove a Failover pair
aClick the port from the Primary Ports list, and then click Remove.
Both ports return to the Available Adaptec Ports box.
bClick Apply.