Adaptec ANA-62000, ANA-69000 Adding or Removing Ports

8-14
DuraLAN Fast Ethernet NICs User’s Guide
Adding or Removing Ports
Note: If you add or remov e a port to o r from a group, any exist ing
group or port IP address is removed automatically. Keep track of
any IP addresses you plan to use again.
1In the Duralink64 Port Aggregation window, go to the
Configuratio n tab.
2In the Group(s) field, click Create New Group, and then type
the new group name, or select the appropriate gr oup you want
to modify.
– To add ports to th e group, click the appropriate port from the
Available Adaptec Ports box, and then click Add.
– To remove ports from the group, click the appropriate port from
the Group Ports box, and then click Remove.
3Repeat step 2 for each appropriate port.
4To save changes, click Apply.
5When you are finished, click OK.
6If SNMP is not set up on the computer, you will receive the
message below. Click OK.
Figure 8-11. This message may be ignored during this installation.