12-4
DuraLAN Fast Ethernet NICs User’s Guide
Editing startnet.bat
To assign multiple ports, follow these steps:
1Load c:\novell\client32\adptsf.lan.
2In
startnet.bat
, type slo t =[ port s l ot nu mb e r ] at the end of
each line. The following example shows the setting assigned
to port 1:
iomap=1 Frame=ETHERNET_802.2 slot=1
3For the next port, enter
iomap=1 Frame=[frame type] slot=[port slot number]
To assign multiple frame types, repeat this step changing the
frame type setting.
4Repeat step 3 for each additional port.
5Save your changes.
6Exit
startnet.bat
.
Connecting Clien ts to the Net Ware Server
Connecting clients to the NetWare Duralink64 server requires the
NDIS driver. Do not use an ODI driver! See the appropriate section:
■Connecting Clients t o the NetWare Failover S erver on page 12-6.
■Installing the NetWare Port Aggregation Driver on page 11-3.