Adaptec ANA-62000, ANA-69000 Configuring the Standard Driver Ports in Windows NT 4.0 and 3.51

6-2
DuraLAN Fast Ethernet NICs User’s Guide
Configuring the Standard Driver Ports
in Windows NT 4.0 and 3.51
In the Adaptec New Hardware Found window, each port is
assigned to Autodetect, the default connection type that will always
detect port connection and negotiate a compatible speed and
transmission mode.
Note: If you are required to insert the W ind ows NT CD, you mu st
re-install the latest version of the Microsoft Windows NT Service
Pack, and then restart the system.
1In the Adaptec New Hardware Found window, make sure all the
DuraLAN NIC ports appear.
Figure 6-1. This window identifies each port’s PCI bus and PCI slot
2In the New Adaptec NIC Port(s) Available for DuraLAN NIC box,
click the appropriate port.
3In the Connection Types list, click the connection type for your
network or use Autodetect Default Connection. For desc ripti ons,
see Connection Types on page A-2.