10-6
DuraLAN Fast Ethernet NICs User’s Guide

Creating the Failover Pairs

The Failover pair consists of two ports only: the primary port and
the backup port.
1In the Main Menu, select Set Failover Pairs, and then press
Enter.
2In the List of Existing Pairs box, press Ins.
Figure 10-5. List of Existing Pairs Box
3Select the pair, and then press Enter. A default pair name uses the
naming convention: first pair= Pair1, second pair=Pair2, third
pair=Pair3, etc.
Figure 10-6. List of Existing Pairs
4In the Failover Pair Con f iguration menu, select Add/Remove
Ports, and then press Enter.
Figure 10-7. Failover Pair Configuration Menu
List of Existing Pairs
No Failover Pairs currently exist
List of Existing PairsList of Existin
1. Pair1
List of Existing Pairs
Failover Pair Configuration
List of Existi
Add/Remove Ports
Set Failover Pair Name
Failover Pair Name
Pair1
1. Pair1
Display Existing Ports