Adaptec ANA-62000, ANA-69000 Creating the Failover Pair

7-3
Duralink64 Failover for Windows NT
5Repeat steps 1 through 4 for each existing port.
6When you are done, click OK.
7Continue with Creating the Failover Pai r.
Creating the Failover Pair
You can create Failover pairs in the Conf iguration tab. A Failover
pair consists of two ports only—the primary port and the backup
port.
Windows NT 4.0
To create Failover pai rs, follow these steps:
1From the Available Adaptec Ports box, click a port to be designated
as a primary port.
Figure 7-2. Failover Configuration Tab
2Click Add. The port is added under Primary Port in the Failover Pair
list.
3To assign a backup to the primary port, click the appropriate port
from the Available Adaptec Ports box, and then click Add. The port
is added in the Backup Port field.