Samsung DV80H4100CW/EE manual Delay END, Interior Lamp on Some Models, Setting & releasing

operating Instructions, tips

DELAY END

You can set the dryer to finish your drying cycle automatically at a later time, choosing a delay of between

1 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the dry will be finished.

The Delay End settings range from 1 hour to 19 hours, depending on the course.

1.Manually or automatically set your drying machine according to the type of laundry you are drying.

2.Press the Delay End button repeatedly until the required delay time is set. If the delay time is set, the “Delay End ” function becomes ON state.

3.Press the Start/Pause button. The “Delay End ” indicator will blink and the clock will begin counting down until it reaches the set time.

4.To cancel a Delay End function, press the Power button and then turn the dryer on again.

INTERIOR LAMP (ON SOME MODELS)

Lights the dryer drum while the dryer is running.

Setting & releasing

If you want to set or release the Interior Lamp, press both the Lamp buttons simultaneously.

This can be set as long as the power is turned on. If you do not turn the Drum Light off within 5 minutes of turning it on, it is automatically turned off.

English - 24

DV80H4000CX-03408D-07_EN.indd Sec5:24 2016-01-19 ￿￿ 3:03:43