Samsung DV70H4300CW/EE manual Alcove or Closet Installation, Electrical Requirements, Grounding

ALCOVE OR CLOSET INSTALLATION

To operate safely and properly, your new Dryer requires minimum clearances of:

Sides – 25 mm	Rear – 51 mm
Top – 25 mm	Front – 465 mm

If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at least 465 mm unobstructed air opening.

ELECTRICAL REQUIREMENTS

Electrical Requirements is AC 220~240 V / 50 Hz.

•Improper connection of the equipment grounding conductor can result in a risk of electric shock.

WARNING	Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is
	properly grounded. Do not modify the plug provided with your dryer – if it doesn’t fit the outlet,
	have a proper outlet installed by a qualified electrician.

•To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with local codes, or in the absence of local codes, It is your responsibility to provide adequate electrical services for your dryer.

GROUNDING

Your dryer must be grounded. If your dryer malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Your dryer comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result electrical shock.

Check with a qualified electrician or serviceman if you are unsure if the dryer is properly grounded. Do not modify the plug provided with the dryer. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

If the product is not grounded, there is a danger of fire or electric shock.

WARNING

English - 13

INSTALLING YOUR DRYER

DV80H4000CX-03408D-07_EN.indd Sec3:13 2016-01-19 ￿￿ 3:03:38