5. Rinse the inside of the froth adjustment knob under running water (see figure alongside).
6.Check that the intake tube and spout are not clogged with milk residues.
7.Replace the knob (lining up the arrow
with the word “INSERT”) the spout and the milk intake tube.
8.Place the lid back on the milk container.
Cleaning the hot water/steam nozzle Each time you prepare milk, clean the nozzle with a sponge to remove milk residues from the gaskets (see figure).
DESCALE
Descale the machine when the message “DESCALE!” flashes on the display.
Important!
Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer’s safety warnings given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin and eyes.
Please note!
Use De’Longhi descaler only.
Under no circumstances should you use sulphamic or acetic based descalers. Their use invalidates the guarantee. Failure to descale the appliance as described also invalidates the guarantee.
1.Turn the machine on and wait for the appliance to be ready for use.
2.Press the P button to enter the menu.
3.Turn the selection knob (fig. 7) until “Descaling” is displayed.
4.Select by pressing the button: Descaling
Confirm?” is displayed. |
|
|
| Press | again to | ||
|
| ||||||
activate the function. |
|
|
| ||||
|
| ||||||
5. The message “Add descaler | Confirm?” |
alternating to | “EMPTY GROUNDS |
CONTAINER” |
|
6.Completely empty the water tank (A9) and remove the water softener filter (if present); then empty the drip tray and the empty grounds container and
7.Pour the descaler into the tank up to the level A (corresponding to a 3.4 oz / 100 ml pack) marked on the back of the tank (fig. 28A), then add water (34oz. / one litre) up to level B (fig. 28B); reinsert the water tank.
8.Place an empty container with a minimum capacity of 50.7 oz. / 1.5 litres under the hot water spout (fig. 4).
Important! Danger of burns
Hot water containing acid flows from the change to hot water spout.
Avoid contact with splashes of water.
9.Press the button to confirm introduction of the solution.
The message “Descaling...” is displayed. The descaling program starts and the descaler liquid comes out of the water spout.
The descale program automatically performs a series of rinses and pauses to remove limescale deposits from inside the machine.
Please note!
It is normal that the appliance is inactive for several minutes between once rinsing and the other.
After about 30 minutes, the message “FILL TANK!” is displayed.
7.The appliance is now ready for rinsing through with clean water. Remove the water tank, empty, rinse under running water, fill with clean water and replace. “Rinsing” is displayed. “Rinsing... Confirm?” is displayed.
8.Empty the container used to collect the descaler solution and replace it empty under the hot water spout.
9.Press the button to start rinsing. Hot water flows out of the spout and the message “Rinsing...” is displayed.
10.When the water tank is completely empty, “ Rinsing complete Confirm?” is displayed.
11.Press the button.
12.Insert the filter (if it was present) in the tank,
18