HP 2570 manual Section B Ethernet wired network, Connect the Ethernet cable

Page 11

B!

Section B: Ethernet (wired) network

B1

Connect the Ethernet cable

a!

b!!

c!

0

0

! !

!USB!

aRemove the yellow plug from the back of the device.

bConnect one end of the Ethernet cable to the Ethernet port on the back of the device.

c Connect the other end of the Ethernet cable to the hub/router/switch. If the cable is not long enough, you can purchase a longer cable.

Important: Do not connect the Ethernet cable to a cable modem.

You must have a working network. If you already connected the USB cable, do not connect the Ethernet cable.

!CD

B2

Choose the correct CD

Windows!

a! !HP All-in-One

Windows CD

Windows Users:

aInsert the HP All-in-One Windows CD.

Macintosh!
a!	!HP All-in-One
	Macintosh CD
Macintosh Users:
a Insert the HP All-in-One
	Macintosh CD.

HP All-in-One • 11

Image 11

Contents Locate components Remove all tapeAttach the control panel faceplate if not attached Lift color graphics displayLoad plain white paper Connect the power cordRemove tape from both cartridges Open the access doorPress the On button Insert the tri-color print cartridge Insert the black print cartridge Turn on your computer Align the print cartridgesUSB USB Connection Do not connect yet Ethernet Wired NetworkChoose ONE connection type a or B Choose the correct CD Section a USB ConnectionGo to back of the guide to make a test copy Connect the USB cableConnect the Ethernet cable Section B Ethernet wired networkUnblock! ! !accept Go to the last page to make a test copy Install software on additional computersHP All-in-One Windows CD 10x15 4x6 Q7211-90284 Print a test copy