HP 2570 manual Print a test copy, Q7211-90284

Page 16

Print a test copy

Q7211-90284

*Q7211-90284*

Q7211-90284

Now that you have ﬁnished setup, it is time to use your HP All-in-One. Make a copy of a favorite photo.

a	a Remove the plain white paper and load the
	4 x 6 in (10x15 cm) photo paper. Place the paper
	glossy side down. Move the paper adjusters next to
	the stack of paper.

b	b	Find a 4x6 in (10x15 cm) photo.
c	c	Place the photo (face down) on the right front corner
		of the glass. Make sure the long edge of the photo is
		along the front of the glass. Close the lid.

d	d Press the Start Copy Color button.

The HP All-in-One makes a copy of your original photo.

To learn about printing photos from memory cards and other features, see the User Guide and online help. For additional help, see www.hp.com/support.

Printed on at least 50% total recycled ﬁber with at least 10% post-consumer paper. © Copyright 2005 Hewlett-Packard Development Company, L.P. Printed in [].

Image 16

Contents Remove all tape Locate componentsLift color graphics display Attach the control panel faceplate if not attachedConnect the power cord Load plain white paperPress the On button Open the access doorRemove tape from both cartridges Insert the tri-color print cartridge Insert the black print cartridge Align the print cartridges Turn on your computerChoose ONE connection type a or B Ethernet Wired NetworkUSB USB Connection Do not connect yet Section a USB Connection Choose the correct CDConnect the USB cable Go to back of the guide to make a test copySection B Ethernet wired network Connect the Ethernet cableUnblock! ! !accept Install software on additional computers Go to the last page to make a test copyHP All-in-One Windows CD 10x15 4x6 Print a test copy Q7211-90284