HP 2570 manual Press the On button, Open the access door, Remove tape from both cartridges

Page 4

8

/On

Press the On button

b!	!	!	!
c!

a After you press the On button, the green light ﬂashes, and then becomes solid. This may take up to a minute.

bWait for the print cartridge prompt before continuing.

9 Open the access door

Lift the access door until it stops. The print carriage moves to the right.

10 Remove tape from both cartridges

! !

Pull the pink tab to remove the tape from both print cartridges.

Do not touch the copper-colored contacts or retape the cartridges.

4 • HP All-in-One

Image 4

Contents Remove all tape Locate componentsLift color graphics display Attach the control panel faceplate if not attachedConnect the power cord Load plain white paperPress the On button Open the access doorRemove tape from both cartridges Insert the tri-color print cartridge Insert the black print cartridge Align the print cartridges Turn on your computerChoose ONE connection type a or B Ethernet Wired NetworkUSB USB Connection Do not connect yet Section a USB Connection Choose the correct CDConnect the USB cable Go to back of the guide to make a test copySection B Ethernet wired network Connect the Ethernet cableUnblock! ! !accept Install software on additional computers Go to the last page to make a test copyHP All-in-One Windows CD 10x15 4x6 Print a test copy Q7211-90284