United States Stove 2007 owner manual Mounting CAST-IRON Flue Collar

MOUNTING CAST-IRON FLUE COLLAR

This heater comes equipped with a cast-iron flue collar with holes to mount the solid damper as

shown below.

Flue Collar - 2708

Solid Damper - 2709

5/16-18 x 1-1/2" Bolts (3 req.)

Weld Tab (3 req.)

Gasket

Holes in Flue collar where bolts attach to heater top.

Bottom view of flue collar

with damper installed

Peel off tape from the back of

the gasket and attach the gasket to the rope groove in the flue collar.

Mount flue collar to the

top of the heater using the

(3)5/16-18 x 1-1/2" Bolts and the (3) Weld tabs

provided in the

parts bag.

The damper must
be install as shown in
this illustration. Slide
the damper into the
flue collar on an angle
and then slide the
damper handle thru
the holes in
the flue collar.	Cross-section of flue
	collar

5/16-18 x 1-1/2

Bolt

Heater top

Side view of flue collar

mount to heater top

Weld Tab

5