HP F100 manual Host bus adapter, HP StorageWorks Modular Smart Array, HP StorageWorks RAID Array

Page 40

40 HP ProLiant Cluster F100 Installation Guide

host bus adapter

A card used to connect a peripheral device to a host server.

HP StorageWorks Modular Smart Array 1000

A storage device including disk drives and one or more resident array controllers.

HP StorageWorks Modular Smart Array 1000 Controller

A hardware device that facilitates communication between a host and one or more devices organized on an MSA1000 storage system.

HP StorageWorks RAID Array 4000 Controller

A hardware device that facilitates communications between a host and one or more devices organized on an RA4100 storage system.

HP StorageWorks RAID Array 4100

A storage device including disk drives and one or more resident array controllers.

input/output

A term that pertains to input and output functions.

interconnect

A physical connection between cluster nodes that transmits intracluster communication.

intracluster communication

The type of communication in which the cluster interconnect is a data path over which nodes of a cluster communicate. At a minimum, the interconnect consists of two network adapters (one in each server) and a cable connecting the adapters.

Image 40
Contents HP ProLiant Cluster F100 Installation Guide Audience Assumptions Contents Technical Support F100 Cluster Components Overview of the HP ProLiant Cluster F100This Section Guidelines for Multiple Clusters HP ProLiant Servers HP StorageWorks Storage SystemsHP StorageWorks Controllers HP StorageWorks SAN SwitchesHost Bus Adapters Cluster Interconnect Optical TransceiversClient Network Interconnect Adapters Private or Public InterconnectRedundant Interconnects Server to Storage CablesCluster Interconnect Microsoft Software Network InterconnectHP SmartStart CD Array Configuration UtilityProLiant Support Packs HP Modular Smart Array 1000 Support Software CD Resources for Application InstallationSystems Insight Manager Overview of the HP ProLiant Cluster F100 Page Setting Up the HP ProLiant Cluster F100 Preinstallation OverviewPreinstallation Guidelines Setting Up the HP ProLiant Cluster F100 Installing the Hardware Setting Up the NodesInstalling Host Bus Adapters Installing the Cluster InterconnectSetting Up the Storage System Setting Up a Dedicated InterconnectPowering Up Configuring Shared StorageEthernet Direct Connect Using a Crossover Cable Setting Up a Public InterconnectEthernet Direct Connect Using a Switch or Hub Multiple Cluster Setup Installing the SoftwareRedundant Interconnect SmartStart Installation SmartStart Installation Steps Cluster-Specific SmartStart InstallationInstalling the Node 1 Operating System Setting Up the HP ProLiant Cluster F100 HP ProLiant Cluster F100 Installation Guide Installing the Node 2 Operating System Validating the Cluster Before You Contact HP Technical SupportHP Contact Information HP ProLiant Cluster F100 Installation Guide Acronyms and Abbreviations HBAMSA1000 Controller MSA1000PnP RA4000 Controller RA4100Page Glossary Dedicated interconnect Disk groupDriver EthernetFault tolerance Failover clusterFibre Channel Gigabit Interface Converter-ShortwaveHost bus adapter HP StorageWorks Modular Smart ArrayHP StorageWorks Modular Smart Array 1000 Controller HP StorageWorks RAID Array 4000 ControllerMicrosoft Cluster Server/Service IP addressLogical unit Logical unit numberPower-On Self-Test NT File SystemPartition PortRedundancy Redundant Array of Inexpensive DisksReliability ResourceSystem Transmission Control Protocol/Internet ProtocolIndex Storage system, set up