Lighting Instructions

OPERATING INSTRUCTIONS

1.STOP! Read the safety information on the previous page.

2.Set the thermostat to lowest setting.

2.Turn off all electrical power and open the access door.

3.Push in gas control (B) slightly and turn clock

wise to "OFF".

5.Push "ON / OFF" switch to "OFF" position.

NOTE: Knob cannot be turned from "PILOT" to "OFF" unless knob is pushed in slightly. Do not force.

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "B" in the safety information on the previous page. If you don't smell gas, go on to the next step.

7.Depressknob(B)andturngascontrolknobcounter

clockwise to "Pilot".

8.Push in knob (B) all the way and hold in. Immediately light the pilot by pushing in on the piezo button (A). Continue to hold the control knob in for about one (1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 4 through 8.

TOP VIEW OF BURNER ASSEMBLY

If the knob does not pop up when released, stop and immediatelycallyourservicetechnicianor gas supplier. If the pilot will not stay lit after several tries, turn control knob to "OFF" and

call your gas supplier.
9. Turn valve knob clockwise	to "ON".

10.Wait about one minute then turn burner switch (D) to "ON". It will take a few minutes for the thermopile located on top of the pilot to heat up.

NOTE: If unit is equipped with remote "on-off" wall switch, switch must be in "on" position for burner to light.

11.Adjust flame height with the high-low knob (C).

12.Turn on all electrical power to the appliance.

13.Close access door.

NOTE: It is normal for the new heater to give off some odor the first time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

It is recommended that you burn your new heater for at least two (2) hours the first time you use it. If optional fan kit is installed, leave it turned off for the break in period.

TURN OFF GAS TO APPLIANCE

1.Open access door.

2.Turn switch (D) to "OFF"

3.Unplug all electric power if service is to be performed.

4.Push in gas control knob slightly and turn clockwise to the "OFF" position.

5.Close access door.

9947 specifications

The United States Stove 9947 is a notable pellet stove designed to provide warm and efficient heating for homes. Known for its robust construction and user-friendly features, the 9947 effectively combines practicality with advanced technology to meet the demands of homeowners looking for an effective heating solution.

One of the primary characteristics of the United States Stove 9947 is its high efficiency. With an efficiency rating of up to 85%, this pellet stove utilizes various technologies that optimize fuel consumption and maximize heat output. It is designed to burn compressed wood pellets, which are not only eco-friendly but also renewable. This makes the 9947 an excellent choice for those looking to reduce their carbon footprint while enjoying the comfort of a warm home.

The stove has a heating capacity of up to 2,500 square feet, making it suitable for larger living spaces. Equipped with a substantial 55-pound hopper, it allows for extended burn times, which means less frequent refueling and increased convenience. This is particularly beneficial during cold winter months when heating demands are at their highest.

Another important feature of the United States Stove 9947 is its adjustable digital control system. This user-friendly interface allows homeowners to easily set and monitor the stove's temperature and burn rate, ensuring a consistent and comfortable environment. Additionally, the stove features an automatic ignition system that ensures a hassle-free startup process, eliminating the need for matches or kindling.

Safety is also a primary concern with the 9947. The stove includes protective features such as a built-in heat shield and a safety cut-off that activates when the stove overheats. This gives homeowners peace of mind, knowing that their heating solution is designed with safety in mind.

The United States Stove 9947 also boasts a stylish design with a contemporary aesthetic that fits well in a variety of home décors. Its compact size and sleek finish allow for versatile placement within living areas and other spaces, enhancing both functionality and visual appeal.

In conclusion, the United States Stove 9947 is a powerful, efficient, and user-friendly heating solution that stands out in the realm of pellet stoves. With its advanced features and commitment to safety, it offers homeowners a reliable option for maintaining warmth and comfort in their homes throughout the cold months. Whether for a cozy cabin or a family home, the 9947 is designed to meet diverse heating needs with ease and elegance.