United States Stove 9947 installation manual Installation, Around air opening for Proper operation

Page 7

INSTALLATION

The following formula can be used to determine the maximum heater rating per the definition of unconfined space:

BTU/HR = (L1+L2) Ft x (W) Ft x (H) Ft x 1000

50

Consider two connecting rooms with an open area between, with the following dimensions:( See Fig. 2, Example)

L1=15-1/2 Ft., L2=12 Ft., W=12 ft., H=8Ft

50

=52800 BTU/HR

If there were a door between the two rooms the calculation would be based only on the room with the heater.

BTU/HR=(15-1/2) x (12) x (8) x 1000

50

=29760 BTU/HR

FIGURE 2.

WARNING

Wheninstallingtheappliancedirectlyoncarpeting,tileorothercombustible material, other than wood flooring, the appliance must be installed on a metal or wood panel extending the full width and depth of the appliance.

WARNING

If the area in which the heater may be operated is smaller than that defined as an unconfined space or if the building is of unusually tight construction, provide adequate combustion and ventilation air by one of the methods described in the National Fuel Gas Code, ANSI Z223.1, Section 5.3, or applicable local codes.

WARNING

Ensure the minimum clearances shown in FIGURE 3 are maintained for accessibility for purposes of servicing and proper operation. Left and right clearances are determined when facing the front of the heater.

 

Maintaintheseclearances

 

 

 

to ensure adequate space

 

 

 

around air opening for

 

 

 

proper operation.

 

 

 

Minimum clearances to

 

 

 

combustibles:

 

 

 

Top of heater

36"

 

 

Right Side of heater

15"

 

 

Left Side of heater

8"

 

 

Front of heater

42"

 

FIGURE 3. Minimum Clearances

Rear of heater

4"

7

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ~WHAT to do Ifyou Smell GAS United States Stove CompanyTable of Contents Important Safety Information Features Product FeaturesContents SpecificationsItems Required for Installation Items Required for InstallationCodes Around air opening for Proper operation InstallationMinimum Mantel Clearances Mantel ClearancesGas Connection GAS ConnectionRear View of 9947 Vent-Free Gas Heater GAS Pressure CheckLOG Positioning LOG AssemblyProper Installation Sequence Removing Front ScreenWhat to do if YOU Smell GAS For Your Safety Read Before LightingFor Your Safety Operating InstructionsTurn OFF GAS to Appliance Lighting InstructionsPilot Flame Cleaning / ServicingMatch Lighting Instructions Checking Flame AppearanceFlames Flame AppearanceHeater Assembly KEY Description QTY Parts ListBurner and LOG Assembly Burner Plate Observed Problem Possible Cause Remedy Trouble ShootingTrouble Shooting Optional Equipment Wiring Diagram for Generator Assembly Wiring Diagram for Blower AssemblyWiring with the WTK60 Wall Thermostat KIT Wiring Guide forStandard Wiring from Factory Wiring of the RCK60 Remote Control KITWiring with the WSK60 Wall Switch KIT Page Limited Warranty Policy United States Stove Company

9947 specifications

The United States Stove 9947 is a notable pellet stove designed to provide warm and efficient heating for homes. Known for its robust construction and user-friendly features, the 9947 effectively combines practicality with advanced technology to meet the demands of homeowners looking for an effective heating solution.

One of the primary characteristics of the United States Stove 9947 is its high efficiency. With an efficiency rating of up to 85%, this pellet stove utilizes various technologies that optimize fuel consumption and maximize heat output. It is designed to burn compressed wood pellets, which are not only eco-friendly but also renewable. This makes the 9947 an excellent choice for those looking to reduce their carbon footprint while enjoying the comfort of a warm home.

The stove has a heating capacity of up to 2,500 square feet, making it suitable for larger living spaces. Equipped with a substantial 55-pound hopper, it allows for extended burn times, which means less frequent refueling and increased convenience. This is particularly beneficial during cold winter months when heating demands are at their highest.

Another important feature of the United States Stove 9947 is its adjustable digital control system. This user-friendly interface allows homeowners to easily set and monitor the stove's temperature and burn rate, ensuring a consistent and comfortable environment. Additionally, the stove features an automatic ignition system that ensures a hassle-free startup process, eliminating the need for matches or kindling.

Safety is also a primary concern with the 9947. The stove includes protective features such as a built-in heat shield and a safety cut-off that activates when the stove overheats. This gives homeowners peace of mind, knowing that their heating solution is designed with safety in mind.

The United States Stove 9947 also boasts a stylish design with a contemporary aesthetic that fits well in a variety of home décors. Its compact size and sleek finish allow for versatile placement within living areas and other spaces, enhancing both functionality and visual appeal.

In conclusion, the United States Stove 9947 is a powerful, efficient, and user-friendly heating solution that stands out in the realm of pellet stoves. With its advanced features and commitment to safety, it offers homeowners a reliable option for maintaining warmth and comfort in their homes throughout the cold months. Whether for a cozy cabin or a family home, the 9947 is designed to meet diverse heating needs with ease and elegance.
Top Page Image Contents